Lubrisen leak stop R1234YF

Instructions for Using Lubrisen Leak Stop 1234yf:
1. Identify the Leak:
- Determine the area of the micro-leak in your automotive A/C system. It could be evident through visual inspection or by using UV dye if necessary.
2. Prepare the System:
- Ensure the A/C system is turned off, and the vehicle is in a well-ventilated area.
3. Shake the Lubrisen Leak Stop Canister:
- Shake the product canister thoroughly to ensure proper mixing of the sealant.
4. Attach the Applicator Hose:
- If your Lubrisen Leak Stop comes with an applicator hose, attach it securely to the canister.
5. Inject the Sealant:
- Introduce the Lubrisen Leak Stop sealant into the A/C system through the appropriate access point. This is typically done by attaching the applicator hose to the low-pressure port.
6. **Run the A/C System:**
- Start the vehicle and turn on the A/C system to allow the sealant to circulate throughout the system.
7. Locate the Leak:
- Monitor the system for signs of escaping sealant, which will react with the air and harden upon contact with the leak source.
8. Permanently Seal the Leak:
- As the Lubrisen Leak Stop reacts and hardens, it will permanently plug the micro-leak, restoring the integrity of the A/C system.
9. Verify Repair:
- Check for proper A/C system functionality and monitor for any signs of leakage. The repair should provide a long-lasting solution.
Note: Lubrisen Leak Stop can also be used preventively to proactively seal potential micro-leaks in the A/C system before they become problematic. Simply follow the same steps as outlined above. Always refer to the product's specific instructions for the most accurate usage guidance.