
Adapter M1/4" SAE x M1/4" NPT brass
Brass coupling adapter from M1/4" SAE male (conical) to M1/4" NPT male (pipe thread).
Note: always check the connection sizes of your service equipment and hoses before ordering. SAE and NPT connections are not interchangeable with other types or sizes.
Brass coupling adapter to convert a M1/4" SAE connection to M1/4" NPT. This allows you to connect a service hose or manifold set with 1/4" SAE to equipment with a 1/4" NPT pipe thread, such as pressure gauges, service blocks or pump connections.
The adapter is made of solid brass and features a machined conical M1/4" SAE male flare connection on one side, and a M1/4" NPT male pipe thread on the other side. The hex in the middle allows tightening with a wrench.
The SAE side seals according to the flare principle, metal-to-metal. The NPT side is a tapered pipe thread that seals on the thread itself; use sealant where required. Only use the adapter between connections with the correct sizing.
Specifications:
- Top connection: M1/4" SAE male (conical/flare)
- Bottom connection: M1/4" NPT male (tapered pipe thread)
- Material: solid brass
- O-ring: none (SAE flare metal-to-metal; NPT thread seal)
- Quantity: 1
No compatibility information available
No reviews yet
Write a review
You must be logged in to write a review.



