Filter drier AC charging station Brain Bee Mahle 170 mm
Replacement filter drier for Brain Bee and Mahle AC charging stations. Length 170 mm, diameter Ø 76 mm with 3/8" flare connections on both sides. Compact design, suitable for CFC, HCFC, HFC and HFO 1234yf refrigerants.
Please note: always check the dimensions and connection of the filter in your charging station before ordering. This filter is the shorter version (170 mm) for Brain Bee and Mahle stations — Workshopparts also supplies the longer 243 mm variant under SKU 15.048. Models and versions may differ.
Filter drier for replacing the filter element in Brain Bee and Mahle AC charging stations. The filter drier dries and filters the refrigerant during recovery and recharging, keeping moisture, acids and particles out of the system to ensure the proper functioning of the charging station.
This is the compact 170 mm version with a filter volume of 0.30 litres. The connections are 3/8" flare (tapered) on both sides, as standard on these Brain Bee and Mahle stations.
Suitable for use with CFC, HCFC, HFC and HFO 1234yf refrigerants. Not suitable for ammonia (R717). The filter has a design pressure of 42 bar and is resistant to temperatures from -42 °C to +100 °C.
Regular replacement of the filter drier is essential for accurate measurements, good vacuum performance and a long service life of the charging station.
Specifications:
- Compatible with: Brain Bee, Mahle AC charging stations
- A — Length: 170 mm
- B — Diameter: Ø 76 mm
- C — Left connection: 3/8" flare (tapered)
- D — Right connection: 3/8" flare (tapered)
- Filter volume: 0.30 litres
- Design pressure: 42 bar
- Temperature range: -42 °C to +100 °C
- Suitable for refrigerants: CFC, HCFC, HFC, HFO 1234yf
- Not suitable for: ammonia (R717)
- Compliant with: PED 2014/68/EU art. 4 par. 3
Brainbee / Mahle
No reviews yet
Write a review
You must be logged in to write a review.
