Puller spare parts
A puller lasts for years if you can replace the wearing parts. This category holds cross-arms, puller jaws, spindles, pressure pieces and repair kits by series. Every part belongs to a particular model, so the part number is your first point of reference. That number is engraved on the cross-arm of your puller. Write it down before you order anything, then you know it will fit. If you are unsure between two sizes, measure the thread of the spindle and the width of the cross-arm. For a complete new puller or another version, look at universal pullers.
KUKKO 610145 Spindle for ball bearing puller set "Universal" (series 69) 69-A, 27-A
KUKKO 1294526K Set screw incl. adapter piece for tie rod and push rod puller with hydraulic lifting cylinder
KUKKO ET-490260 Pressure pieces for screw clamps
KUKKO ET-616072-GR 3K comfort grip with spindle for screw clamps VIRIDIS with 3K comfort grip
KUKKO Y218-07-P Pair of pulling bolt 15 t
KUKKO 015450 Side bolt with nut for separators Y-315-5, Y-515-5, 15-E, 15-5
KUKKO 8-HP-EP Parts kit for hydraulic spindle
KUKKO 12-3-T Cross-arm for 3-arm puller with pre-adjustable jaws 12-3
KUKKO 16-22-6 Expanding spindle with accessories for internal puller 16-21
KUKKO 20-5-T Cross-arm with bush for 2-arm universal puller 20-5
KUKKO 21-90-33 Expanding body set for internal puller 21-90-33
KUKKO 56-1ERS Wear parts set for nut splitter 56-1
KUKKO 69-C-T Cross-arm for ball bearing puller sets "Universal" 69-C
KUKKO 113-3-33 Clamping ring for 3-arm puller for ball bearing
KUKKO 120-20-T Cross-arm for 2-arm universal puller "Economy" 120-20
KUKKO 203-1-T Cross-arm for 3-arm combination puller with reversible jaws 207-01, 203-1
KUKKO 204-2-T Cross-arm for 2-arm universal puller with side clamp 210-1, 204-2, 204-02, 204-V
KUKKO 209-2B-T Cross-arm for 3-arm universal puller "Economy" with swivelling jaws, adjustable clamping depth, long hydraulic spindle 209-2-B
KUKKO 222-E Spare blade with screw for seal puller K-222
KUKKO 224-121 Internal puller for slide hammer puller 224-1
KUKKO 482-3-T Cross-arm for 2-arm universal pullers with Auto-Snap 482-3, 483-3
KUKKO 1293A06 Centre spindle for ball joint puller with lever transmission
KUKKO 129025 Replacement plates for ball joint puller 129-0-25
KUKKO 129314 Replacement plates for Ball joint puller 129-3
KUKKO 129914 Replacement plates for Ball joint puller 129-0-29
Puller parts: how to order the right one
Which part do you need?
Every puller has a part number. It is engraved on the cross-arm. Search on that number and you will find the matching part. If it is a cross-arm, the fit on the arms has to be right. With a puller jaw you check the shape of the jaw. A pressure piece belongs to the spindle size you are using.
Where ordering goes wrong
One spindle often looks like another, but the thread differs. Check the size of the spindle and the shape of the spindle tip. A wrong spindle will not fit or will damage your workpiece. With a cross-arm you look at the width and at the holes the arms drop into. Anyone who keeps using a puller with a worn cross-arm puts more force on the arms than needed.
Original or universal
An original part belongs to your puller and fits without any adjustment. Universal pullers often have their own series of cross-arms and jaws. For a puller with a hydraulic cylinder, the parts are not interchangeable with a hand-operated version. Look at internal pullers if you need to grip a bearing from the inside, or at slide hammers and counterstays for heavier work. A damaged puller jaw or a bent cross-arm is better replaced before you start on a seized bearing.
Repair kits and loose parts
Some series have repair kits with the parts that wear first. Loose cross-arms are ordered by model, such as the cross-arm for the 20-20. Put the part number of your puller in your records, then you will not have to search next time.