Puller spare parts
A puller lasts for years if you can replace the wearing parts. This category holds cross-arms, puller jaws, spindles, pressure pieces and repair kits by series. Every part belongs to a particular model, so the part number is your first point of reference. That number is engraved on the cross-arm of your puller. Write it down before you order anything, then you know it will fit. If you are unsure between two sizes, measure the thread of the spindle and the width of the cross-arm. For a complete new puller or another version, look at universal pullers.
KUKKO 022-206 Spindle for Counterstays 22-2, 224-676
KUKKO 101-146 Spindle with hex nut, Washer for hand screw clamp 101-145
KUKKO 222-P Pick with 2K handle for seal puller K-222
KUKKO 620260 Double-sided spindle tip for mechanical pressure spindles M20, G1/2", G5/8", G3/4"
KUKKO 101-101 Spindle with hex nut, Washer for hand screw clamp 101-100
KUKKO ET-PKD2 10 plastic protective caps for pressure pieces for malleable cast iron screw clamps VIRIDIS
KUKKO ET-PKD3 10 plastic protective caps for pressure pieces for malleable cast iron screw clamps VIRIDIS
KUKKO 612140 Double spindle tip for mechanical pressure spindles M12 - M14
KUKKO 600648 Mechanical pressure spindle for mini puller for fine mechanics (series Micro) MICRO
KUKKO 129506 Set screw for Ball joint puller 129-3, 129-5-H, 129-5, 129-4
KUKKO 220-221-GH Slide hammer for parts of the series 220 and 221
KUKKO 106-201 Spindle with nut for Hand screw clamp 106-200
KUKKO 614051 Mechanical spindle for puller for camshaft gears (VW/Audi) (series 118) 118-0, 118-1
KUKKO 101-201 Spindle with hex nut, Washer for hand screw clamp 101-200
KUKKO 101-181 Spindle with hex nut, Washer for hand screw clamp 101-180
KUKKO 109-181 Spindle with nut
KUKKO 101-131 Spindle with hex nut, Washer for hand screw clamp 101-130
KUKKO 800017 Spindle pressure piece for 800, 801, 802
KUKKO 44-4-206 Cross-arm insert bush with spindle for 2- and 3-arm universal puller with self-centring jaws 44-4, 45-4
KUKKO 616180 Two-part spindle tip for mechanical pressure spindles M16, M16x1.5 and M18x1.5
KUKKO 109-251 Spindle with nut
KUKKO 44-3-206 Cross-arm insert bush with Spindle for 2-arm universal puller with self-centring jaws 44-3, 45-3
KUKKO 10-1 Hydraulic press for Hydraulic wheel hub pullers 10-A, 10-G
KUKKO 616038 Centre spindle for ball joint puller with lever transmission (series 129-2) 129-2
KUKKO 113-117 Spindle with Wing nut for tool holder 113-20, 113-3
Puller parts: how to order the right one
Which part do you need?
Every puller has a part number. It is engraved on the cross-arm. Search on that number and you will find the matching part. If it is a cross-arm, the fit on the arms has to be right. With a puller jaw you check the shape of the jaw. A pressure piece belongs to the spindle size you are using.
Where ordering goes wrong
One spindle often looks like another, but the thread differs. Check the size of the spindle and the shape of the spindle tip. A wrong spindle will not fit or will damage your workpiece. With a cross-arm you look at the width and at the holes the arms drop into. Anyone who keeps using a puller with a worn cross-arm puts more force on the arms than needed.
Original or universal
An original part belongs to your puller and fits without any adjustment. Universal pullers often have their own series of cross-arms and jaws. For a puller with a hydraulic cylinder, the parts are not interchangeable with a hand-operated version. Look at internal pullers if you need to grip a bearing from the inside, or at slide hammers and counterstays for heavier work. A damaged puller jaw or a bent cross-arm is better replaced before you start on a seized bearing.
Repair kits and loose parts
Some series have repair kits with the parts that wear first. Loose cross-arms are ordered by model, such as the cross-arm for the 20-20. Put the part number of your puller in your records, then you will not have to search next time.