Puller spare parts
A puller lasts for years if you can replace the wearing parts. This category holds cross-arms, puller jaws, spindles, pressure pieces and repair kits by series. Every part belongs to a particular model, so the part number is your first point of reference. That number is engraved on the cross-arm of your puller. Write it down before you order anything, then you know it will fit. If you are unsure between two sizes, measure the thread of the spindle and the width of the cross-arm. For a complete new puller or another version, look at universal pullers.
KUKKO 20-4-T Cross-arm for 2-arm universal puller 20-4
KUKKO 21-90-6 Expanding spindle for internal puller 21-90
KUKKO 30-3-T Cross-arm for 3-arm universal puller 30-3
KUKKO 41-0-T Cross-arm for 2-arm universal puller with swivelling jaws 208-0, 41-0
KUKKO 41-1-T Cross-arm for 2-arm universal puller with swivelling jaws 41-2, 41-1
KUKKO 45-4-T Cross-arm for 3-arm universal puller with self-centring jaws 45-5, 45-6, 45-4, 45-7
KUKKO 46-47-T Cross-arms for 2- and 3-arm universal pullers with swivelling jaws 46-1-A, 46-1-B, 46-2-A, 46-2-B, 47-1-A, 47-1-B, 47-2-A, 47-2-B
KUKKO 55-0-06 Spindle with chuck for single-cutting, mechanical nut splitter 55-0-C, 55-0
KUKKO 69-B6 Bearing adapter (pair) for Ball bearing puller sets "Universal" 69-B6
KUKKO 103-161 Spindle with nut for Hand screw clamp with key 103-160
KUKKO 120-1-T Cross-arm for 2-arm universal puller "Economy" 120-1
KUKKO 165-E-01 Spindle for Universal spreader 165-E
KUKKO 204-1-T Cross-arm for 2-arm universal puller with side clamp 204-1
KUKKO 204-3-T Cross-arm for 2-arm universal puller with side clamp 210-2, 210-3, 204-3
KUKKO 219-V Clamp complete for 2-arm pullers for gearbox gears for VW/Audi clutch-gearbox combination 20-10-V
KUKKO 482-5-206 Mechanical pressure spindle with glue clamps, spring for 2-arm universal puller with Auto-Snap 482-5
KUKKO 129414 Replacement plates for Ball joint puller 129-4
KUKKO 129514 Replacement plates for Ball joint puller 129-5
KUKKO 614042 Mechanical spindle for ball joint puller (series 128) 128-1
KUKKO 616056 Mechanical pressure spindle for ball joint puller (series 128) 128-2
KUKKO ET-618183-HRT Spindle with wooden handle for glue clamps VIRIDIS with wooden handle
KUKKO Y518-03 Cross-arm for 50T. hydraulic extractor
KUKKO 015401 Side bolt with nut for separators Y-215-4, Y-315-4, 15-D, 15-4
KUKKO 069061 Pulling bolt for ball bearing puller sets "Universal" 69-A
KUKKO 8-1-ERS Repair parts for long hydraulic spindles 8-1-B, 8-1-F
Puller parts: how to order the right one
Which part do you need?
Every puller has a part number. It is engraved on the cross-arm. Search on that number and you will find the matching part. If it is a cross-arm, the fit on the arms has to be right. With a puller jaw you check the shape of the jaw. A pressure piece belongs to the spindle size you are using.
Where ordering goes wrong
One spindle often looks like another, but the thread differs. Check the size of the spindle and the shape of the spindle tip. A wrong spindle will not fit or will damage your workpiece. With a cross-arm you look at the width and at the holes the arms drop into. Anyone who keeps using a puller with a worn cross-arm puts more force on the arms than needed.
Original or universal
An original part belongs to your puller and fits without any adjustment. Universal pullers often have their own series of cross-arms and jaws. For a puller with a hydraulic cylinder, the parts are not interchangeable with a hand-operated version. Look at internal pullers if you need to grip a bearing from the inside, or at slide hammers and counterstays for heavier work. A damaged puller jaw or a bent cross-arm is better replaced before you start on a seized bearing.
Repair kits and loose parts
Some series have repair kits with the parts that wear first. Loose cross-arms are ordered by model, such as the cross-arm for the 20-20. Put the part number of your puller in your records, then you will not have to search next time.