Puller spare parts
A puller lasts for years if you can replace the wearing parts. This category holds cross-arms, puller jaws, spindles, pressure pieces and repair kits by series. Every part belongs to a particular model, so the part number is your first point of reference. That number is engraved on the cross-arm of your puller. Write it down before you order anything, then you know it will fit. If you are unsure between two sizes, measure the thread of the spindle and the width of the cross-arm. For a complete new puller or another version, look at universal pullers.
KUKKO 220-1-T Cross-arm for puller with conical self-clamping of series 220
KUKKO 43-1-206 Mechanical spindle for manual small parts puller 43-1, 27-A, 43-2, 43-11, 43-12, 43-13
KUKKO 610060 Spindle with Pressure piece for Universal-Wischerarmabzieher (Baureihe 128-F-SW) 128-F-60, 128-F-SW
KUKKO Y218-03 Cross-arm for 20T. hydraulic extractor
KUKKO 20-10-T Cross-arm for 2-arm universal puller 20-10
KUKKO 1294526L Set screw incl. adapter piece for tie rod and push rod puller
KUKKO 44-2-206 Cross-arm insert bush with Spindle for 2-arm universal puller with self-centring jaws 44-2, 45-2
KUKKO 44-2-T 2-arm cross-arm for 2-arm universal puller with self-centring jaws 44-2
KUKKO 018175 Pulling bolts for extractors 15-K, 17-K, 18-0
KUKKO 015145 Side bolt with nut for separators 15-A, 15-1
KUKKO 18-5-20 Insert bush for heavy-duty pullers
KUKKO ET-490225 Pressure pieces for screw clamps
KUKKO 43-11-T Cross-arm for 3-arm universal puller with self-centring jaws 43-0-11, 43-11, 43-12, 43-13, 43-011
KUKKO 43-0-1-206 Mechanical spindle for manual small parts puller 43-0-1, 43-0-11
KUKKO 129057 Plug pin for ball joint puller with force amplification 129-0, 129-0-25, 129-0-29, 129-0-DC-1, 129-0-DC-2
KUKKO 633370 Double-sided spindle point for mechanical spindles G1", G1.1/8"
KUKKO 45-2-T Cross-arm for 3-arm universal puller with self-centring jaws 45-2
KUKKO 56-1-M Spare chisel for splitting chisel grease-hydraulic 56-1
KUKKO 54-3-M Spare chisel for, double-cutting, mechanical nut splitter K-54-B, 54-3
KUKKO ET-490320 Pressure pieces for screw clamps
KUKKO Y318-03 Cross-arm for 30T. hydraulic extractor
KUKKO 018275 Pulling bolts for extractors 15-B, 17-B, 68-2, 18-2, 18-2-B
KUKKO 018265 Pulling bolts for extractors 15-A, 17-A, 68-10, 18-1
KUKKO 022-106 Spindle for Counterstays 22-1
KUKKO 20-30-T Cross-arm for 2-arm universal puller 20-30
Puller parts: how to order the right one
Which part do you need?
Every puller has a part number. It is engraved on the cross-arm. Search on that number and you will find the matching part. If it is a cross-arm, the fit on the arms has to be right. With a puller jaw you check the shape of the jaw. A pressure piece belongs to the spindle size you are using.
Where ordering goes wrong
One spindle often looks like another, but the thread differs. Check the size of the spindle and the shape of the spindle tip. A wrong spindle will not fit or will damage your workpiece. With a cross-arm you look at the width and at the holes the arms drop into. Anyone who keeps using a puller with a worn cross-arm puts more force on the arms than needed.
Original or universal
An original part belongs to your puller and fits without any adjustment. Universal pullers often have their own series of cross-arms and jaws. For a puller with a hydraulic cylinder, the parts are not interchangeable with a hand-operated version. Look at internal pullers if you need to grip a bearing from the inside, or at slide hammers and counterstays for heavier work. A damaged puller jaw or a bent cross-arm is better replaced before you start on a seized bearing.
Repair kits and loose parts
Some series have repair kits with the parts that wear first. Loose cross-arms are ordered by model, such as the cross-arm for the 20-20. Put the part number of your puller in your records, then you will not have to search next time.