Induction Heater | 1.5 kW

suitable for:

principle of operation:

• there is an alternating magnetic field, the metallic object (e.g. nut), in the induction coil, acts on the induced eddy currents as an electrical resistance and thus heats up
• allows heating of screws/nuts without heating surrounding components too much or even destroying them, as it is often the case when heated with a torch
• within the shortest possible time, e.g. rusty nuts are heated and can be loosened
• using on e. g. ball joint pinch bolts and other items on axle and engine
• a formless coil (length: 800 mm) allows using the device also for heating of components (bearings, etc.) e.g. bearings in which the heating facilitates disassembly or assembly
• includes the following induction coils
• induction coil: 19 mm, length: 220 mm (for Ø 10-16 mm)
• induction coil: 27 mm, length: 220 mm (for Ø 17-24 mm)
• induction coil: 50 mm, length: 235 mm (for heating small surfaces)
• formless coil, 800 mm, for heating of components
• max. power: 1.5 kW
• max. current: 7.5 A

Specifications

• Length: 200 mm
• Height: 75 mm
• Width: 140 mm
• Working temperature max.: 900 °C
• Protection rating (IP): IP20
• Rated voltage: 230 V(AC)