KUKKO 204-0 Bearing Puller Cobra, 50 x 70 mm

The Cobra version combines separator and puller in one tool. The arms force a ground edge behind the bearing and draw it off in the same movement — so there is no swapping tools halfway, which is exactly when a loose separator shifts.

The side clamp holds the arms in place under load. That is the difference from an ordinary two-arm puller: that one spreads as pulling force rises and loses grip, while here the clamp keeps the arms tensioned against the part.

Use it for bearing work on drive shafts, hubs and gearboxes, wherever the bearing sits against a shoulder.

Specifications

• Clamping range: 50 x 70 mm
• Number of arms: 2
• Design: zijklem en scheidingsklauw
• Dimensions (w × h × d): 140 × 135 × 34 mm
• Material: tool steel
• Weight: 0.69 kg
• Series: 204-0
• Parts group: ABZ204
• Manufacturer: KUKKO, Remscheid (Germany)