Puller spare parts
A puller lasts for years if you can replace the wearing parts. This category holds cross-arms, puller jaws, spindles, pressure pieces and repair kits by series. Every part belongs to a particular model, so the part number is your first point of reference. That number is engraved on the cross-arm of your puller. Write it down before you order anything, then you know it will fit. If you are unsure between two sizes, measure the thread of the spindle and the width of the cross-arm. For a complete new puller or another version, look at universal pullers.
KUKKO 017322 Side bolt with nut for separators 17-C, 17-3
KUKKO 021089 Set pulling segments for internal puller
KUKKO 11-1-20 Insert bush for heavy-duty puller
KUKKO 12-1-206 Cross-arm inner bushes with spindle for 3-arm pullers "Alligator" with adjustable jaws 12-1
KUKKO 17-0-T Cross-arm for Separators with quick-clamp pressure spindle 17-0, 17-1, 17-K
KUKKO 20-3-T Cross-arm for 2-arm universal puller 20-3
KUKKO 30-2-T Cross-arm for 3-arm universal puller 30-2
KUKKO 42-1-T Cross-arm for 3-arm universal puller with swivelling jaws 42-2, 42-1
KUKKO 69-A-T Cross-arm for ball bearing puller sets "Universal" 69-A, 27-A
KUKKO 69-C9 Bearing adapter (pair) for Ball bearing puller sets "Universal" 69-C9
KUKKO 69-C11 Bearing adapter (pair) for Ball bearing puller sets "Universal" 69-C11
KUKKO 120-10-T Cross-arm for 2-arm universal puller "Economy" 120-10
KUKKO 203-2-T Cross-arm for 3-arm combination puller with reversible jaws 207-02-B, 203-2, 207-02
KUKKO 482-2-206 Mechanical pressure spindle with glue clamps, spring for 2-arm universal puller with Auto-Snap 482-1, 482-2, 483-2
KUKKO 618290 Mechanical pressure spindle for Deep groove ball bearing puller (series 70) 70-3
KUKKO 1294557 Pressure bolts for tie rod and push rod puller with hydraulic lifting cylinder 129-5-45-H10, 129-5-45-H20, 129-5-50-H10, 129-5-50-H20
KUKKO ET-PKD1 10 plastic protective caps for pressure pieces for malleable cast iron screw clamps VIRIDIS
KUKKO 8-K Spindle insert for long hydraulic spindles 8-2-K
KUKKO 11-0-206 Cross-arm insert bush with Spindle for extra heavy-duty 3-arm puller 11-0-A, 11-0-A3, 11-0-A4, 11-0-A5, 11-0-AV
KUKKO 16-22-V Spindle extension for cylinder liner puller K-16-A, K-16-B
KUKKO 18-5-T Cross-arm for Extractor 18-5, 18-5-B, 15-E
KUKKO 22-5-T Cross-arm for Counterstays 22-5
KUKKO 55-1-M Spare chisel for single-cutting, mechanical nut splitter 55-1-C, K-55-B, 55-1
KUKKO 68-2-T cross-arm for combination extractor
KUKKO 69-B4 Bearing adapter (pair) for Ball bearing puller sets "Universal" 69-B4
Puller parts: how to order the right one
Which part do you need?
Every puller has a part number. It is engraved on the cross-arm. Search on that number and you will find the matching part. If it is a cross-arm, the fit on the arms has to be right. With a puller jaw you check the shape of the jaw. A pressure piece belongs to the spindle size you are using.
Where ordering goes wrong
One spindle often looks like another, but the thread differs. Check the size of the spindle and the shape of the spindle tip. A wrong spindle will not fit or will damage your workpiece. With a cross-arm you look at the width and at the holes the arms drop into. Anyone who keeps using a puller with a worn cross-arm puts more force on the arms than needed.
Original or universal
An original part belongs to your puller and fits without any adjustment. Universal pullers often have their own series of cross-arms and jaws. For a puller with a hydraulic cylinder, the parts are not interchangeable with a hand-operated version. Look at internal pullers if you need to grip a bearing from the inside, or at slide hammers and counterstays for heavier work. A damaged puller jaw or a bent cross-arm is better replaced before you start on a seized bearing.
Repair kits and loose parts
Some series have repair kits with the parts that wear first. Loose cross-arms are ordered by model, such as the cross-arm for the 20-20. Put the part number of your puller in your records, then you will not have to search next time.