Blades and parts
Spare blades for all NES tools in 60° (metric/UN) and 55° (British Standard), special blades for coarse or fine threads, guide sleeves, keyway skip adapters and nylon protective pads. Blades are supplied singly.
NES NE-00010 RK1 blades 60°
NES NE-00020 RK1 blades 55° (British Standard)
NES NE-00030 RK2 blades 60°
NES NE-00031F RK2 blades 60°, for threads finer than 17TPI or 1.5mm
NES NE-00040 RK2 blades 55° (British Standard)
NES NE-00041F RK2 blades 55°, for threads finer than 17TPI or 1.5mm
NES NE-03010 RK3 blades 60°
NES NE-03011C RK3 blades 60°, for threads coarser than 7TPI or 3.5mm
NES NE-03012F RK3 blades 60°, for threads finer than 14TPI or 1.75mm
NES NE-03020 RK3 blades 55° (British Standard)
NES NE-03021C RK3 blades 55°, for threads coarser than 7TPI or 3.5mm
NES NE-03022F RK3 blades 55°, for threads finer than 14TPI or 1.75mm
NES NE-03032 RK3 60° 1.0mm multi-tooth blade for keyway skip adapter
NES NE-03033 RK3 60° 1.25mm multi-tooth blade for keyway skip adapter
NES NE-03034 RK3 60° 1.50mm multi-tooth blade for keyway skip adapter
NES NE-03035 RK3 60° 1.75mm multi-tooth blade for keyway skip adapter
NES NE-03036 RK3 60° 2.0mm multi-tooth blade for keyway skip adapter
NES NE-03114 RK3 60° 14TPI multi-tooth blade for keyway skip adapter
NES NE-03116 RK3 60° 16TPI multi-tooth blade for keyway skip adapter
NES NE-03118 RK3 60° 18TPI multi-tooth blade for keyway skip adapter
NES NE-03120 RK3 60° 20TPI multi-tooth blade for keyway skip adapter
NES NE-03124 RK3 60° 24TPI multi-tooth blade for keyway skip adapter
NES NE-07215 RK21 blades 55° (British Standard)
NES NE-07216 RK21 blades 60°
Spare blades for thread repair
Which size do you need?
Spare blades come in 60° for metric and UN threads. The 55° version is for British Standard threads. Always check the pitch of the thread you are repairing. That way you choose the right blade.
Where ordering goes wrong
Many mechanics order a blade without checking the thread fineness. For threads coarser than 17 TPI or 1.5 mm pitch, use a standard blade. For threads finer than 17 TPI or 1.5 mm, you need a special blade. A wrong choice damages the thread. So always measure the pitch first.
Parts and accessories
Besides blades, you will find guide sleeves and keyway skip adapters here. They keep the tool straight during the repair. Nylon protective pads prevent damage to the workpiece. Blades are supplied per piece. That way you only replace what is worn.
These blades and parts belong to thread repair.