Chassis, Brakes & Drive
Choose tools that fit the chassis, brake and drive components. Spring compressors for upside down forks clamp onto the outer fork diameter. Tyre levers come in lengths, short models struggle on wide rims. Chain breakers need the correct pitch, measure it before ordering.
Spring Tensioner | for Upside-Down Forks
Tyre Lever with Aluminium Handle | for Motorcycles | 390 mm
Tyre Lever | for Motorcycles | 370 mm
Chain Cutter | for Chains 3/4" - 1.1/4"
2 pack sizes · from €37.08
1-2
Separating and Riveting Tool for Motorbike Chains | Division 35-525
Separating Tip | for BGS 1749 | 2.2 mm
3 pack sizes
1-2
Rivet Bolt | for BGS 1749
Empty Case for BGS 1749
Motorcycle Special Socket | 10 mm (3/8") | 12 - 24 mm
2 pack sizes · from €16.91
1-2
Motorcycle Special Socket | 19 - 22 - 24 mm
Bit Set | for Motorcycles | Internal Hexagon | 17 - 24 mm
Axle Nut Sockets | for Ducati | 8 pcs.
Fork Cap Wrench | for Ohlins Forks
Clutch Basket Holding Tool | for Ducati | Steel Version
Front Axle Alignment Tool | for Ducati | Ø 25 mm
2 pack sizes · from €30.72
1-2
Impact Socket, Hexagon / 12-point | for Ducati Wheel Fixings | 12,5 mm (1/2") Drive | 28 / 55 mm
Chain Adjusting Tool | for Ducati 748 | 916 | 996 | 998
2 pack sizes · from €50.53
1-2
Groove Nut Socket for Suzuki swing arms
Impact Socket, Hexagon / 12-point | for Ducati Wheel Fixings | 12,5 mm (1/2") Drive | 30 / 55 mm
Fork Cap Wrench | for Ohlins Forks | for Ducati
Fork Cap Wrench | for Sachs Forks | for Ducati
Fork Cap Wrench | for Marzocchi Forks | for Ducati
Fork Cap Wrench | for Ohlins Forks | for Ducati
Wire Spoke Wrench
Chassis tools for your motorcycle
Choose the right size for your fork and tyres
For chassis work you need tools that fit your motorcycle. A spring compressor for upside down forks clamps on the outside diameter of the wear bush. Measure that diameter before you order. Tyre levers come in different lengths. Short models make tyre changes on wide rims difficult. Choose a long model for heavy work.
How to avoid mistakes when ordering
Chain breakers need the correct pitch for your chain. Measure the pitch of your chain before you choose a breaker. A wrong pitch damages the chain and the tool. Check that the breaker suits your chain type, such as an O-ring or sealed chain.
Why the right standard matters
Tools that meet a standard, such as DIN, guarantee correct dimensions. That is important for a spring compressor or a chain breaker. With the right standard you know the tool fits your motorcycle parts. You work safely and prevent damage.
This tool sits under speciality tools for motorbikes. For work on the engine, see engine and attachments. To raise the bike to working height, use a lift or stand.