Speciality Tools Motorbike
This category contains specialist tools for motorcycle maintenance and repair. You will find oil filter wrenches, fork spring compressors, tyre levers and clutch hub locking tools. These tools are essential for jobs that cannot be done with standard tools. The correct choice depends on the type of job, the size of the component and the tool design. Always check specifications such as diameter, connection and number of parts.
Clutch Cage Holder
Replacement Hydraulic Cylinder | for BGS 8389
Spring Tensioner | for Upside-Down Forks
Tyre Lever with Aluminium Handle | for Motorcycles | 390 mm
Valve Spring Compressor Set | 16 - 30 mm
Motorcycle Wheel Balancer
Tyre Lever | for Motorcycles | 370 mm
Alternator Cover Puller | for Ducati
Motorcycle Lifter | 150 kg
Chain Cutter | for Chains 3/4" - 1.1/4"
2 pack sizes · from €37.08
1-2
Separating and Riveting Tool for Motorbike Chains | Division 35-525
Camshaft Locking Tool | for Ducati (Testastretta)
3 pack sizes
1-2
Separating Tip | for BGS 1749 | 2.2 mm
3 pack sizes
1-2
Rivet Bolt | for BGS 1749
Camshaft Locking Tool | for Ducati | 2 pcs.
Empty Case for BGS 1749
Flywheel Locking Tool | for Ducati
Motorcycle Special Socket | 10 mm (3/8") | 12 - 24 mm
2 pack sizes · from €16.91
1-2
Motorcycle Special Socket | 19 - 22 - 24 mm
Special Socket | for Ducati Pully Nut Socket | 28 mm
Bit Set | for Motorcycles | Internal Hexagon | 17 - 24 mm
Special Socket | for Ducati Pully Nut Socket | 24 mm
Axle Nut Sockets | for Ducati | 8 pcs.
Clutch Disc Centering Tool | for BMW Motorcycles R and K Series
2 pack sizes · from €29.28
1-2Frequently asked questions about Speciality Tools Motorbike
Answers to the most common questions from our customers
Measure the diameter of your oil filter. Also check the number of flats on the wrench. The tool must fit tightly over the filter, otherwise you will damage it when loosening. The product information always lists the diameter and the number of flats.
No, spring compressors are made for a certain range of tube diameters. You will find this range in the specifications. For upside down forks there is a special version with an open clamp. Measure the outer diameter of your inner and outer fork tubes to select the correct tool.
A universal lever is too long and can damage the rim or the tyre. Special motorcycle levers have a longer handle and a plastic or aluminium tip. This lets you change a motorcycle tyre without breaking spokes or damaging the rim.
Yes, without a locking tool the clutch hub spins. That makes it impossible to loosen the centre bolt. The locking tool holds the hub in place. Check that the spanner size matches your clutch hub.
Choose tools made from hardened steel with a solid finish. Spring compressors and locking tools work under high tension. Inspect them before each use for any damage. Follow the instructions in the workshop manual. Then they are safe.
Speciality Tools for Motorbike Maintenance
Speciality Tools Motorbike
Here you will find the tools you need for maintenance and repair of your motorbike. The range is divided into three groups: lifters, tools for the engine and attachments, and tools for the chassis, brakes and drive.
Lifters and stands
A lifter or stand raises your motorbike or ATV safely to working height. Check the load capacity, the lifting height and the width of the platform. Choose a model that carries at least the weight of your machine. A stable stand is also useful for winter storage.
Engine and attachments
For work on the engine and attachments you use special wrenches. Think of an oil filter wrench for a specific brand, or a locking tool for the flywheel. These tools do not replace standard tools, they complement them. Always check the diameter and the version before you buy.
Chassis, brakes and drive
For the fork, the brakes and the chain you need different tools. A spring compressor for upside down forks clamps onto the outside diameter of the leg. A brake piston retraction tool pushes the pistons back into the caliper. And with a chain tool set you replace links and locks.
How to choose
Do you want to lift the bike for a major service? Choose a lifter. Do you only need to change the oil? Then an oil filter wrench from the engine and attachments group is enough. For suspension or brake work, take tools from chassis, brakes and drive. This way you always have the right tool at hand.