Housing & wheels
Replacing a housing or wheels on your service equipment? Measure the original part first. For wheels, check the diameter, width, and load rating. For housings, note the bolt hole spacing and overall height. Then choose the correct replacement from our selection. This avoids returns and keeps your equipment moving safely.
Pocket ASC 6400 G LE
Wheel diam. 100 + brake
Wheel diam. 250, black
Rear wheel 200 black
Repair kit for 3/4" pipe line
Repair kit for 8 mm pipe line
repair kit for 1/2" pipes
repair kit for 3/8" pipes
repair kit for 5/16" pipes
repair kit for 5/8" pipes
WAECO ADAPT-FKIT | Repair set of 6 gaskets, accessory for A/C flush adapter kit II
Bag ASC black without print
Temperature sensor ASC 2000 RPA
WAECO ACT-THRM | Temperature probe for dual diagnostic thermometer
front cover ASC 1000
Front cover ASC-2000
front cover ASC 2500
Front cover ASC-3000
Front Cover ASC 500 RPA
Front cover without pocket
Front wheel with brake
Housings and wheels for service equipment
What size wheels do you need?
Measure the diameter and width of the old wheel. Also check the load capacity. It is often printed on the side of the tyre. Always choose a wheel that can handle the weight of your machine. A wheel that is too light will deform and may break.
What to look for in a housing?
Measure the mounting holes and the total height of the old housing. Check that the screw holes are at the same distance. A new housing must fit your series of equipment exactly. This prevents you from having to modify parts.
Why is the correct fit important?
A wrong housing or wheel can lead to unsafe situations. The equipment may wobble or parts may come loose. Therefore, always choose parts made specifically for your series. This keeps your equipment safe and mobile.
These housings and wheels are part of service unit spare parts. Do you also need new pumps, valves and distillation parts, or do you want to replace the controls and electronics of your machine? Take a look at those categories.