Leak detection & UV
For leak detection in oil and cooling systems, use a UV lamp and a leak detection dye. The dye must match the fluid, such as engine oil, transmission oil, or hydraulic oil. Always check the dye is suitable for your system. A powerful UV lamp shows the glowing dye clearly, even on tiny cracks. Protect your eyes with a UV-absorbing safety glass.

WAECO LK-DETECT | Forming gas pressure reducer, R134a, up to 20 bar

WAECO NITRO-DETECT | Extension kit for nitrogen pressure gauge and leak detector, R1234yf
Filter cover for WAECO 3000PPM leak detector
Filter for WAECO 3000PPM leak detector

Forming gas pressure reducer 90 bar
Leak detection sticker (50 Pieces)
LeakTracker, UV leak detection lamp LT-300

WAECO Leak Detector | Electronic leak detector for R134a, R1234yf, HCFCs, HFCs
Leak detector case with insert

Leak detection spray, 500 ml
LED blue light UV leak detection flashlight

WAECO Leak Detector Multi-gas | Multi-gas leak detector
Nitrogen gas kit R1234yf
Nitrogen leak detection with hose, France
Nitrogen leak detection with hose, USA
Nitrogen pressure reducer, 0-35 bar
Nitrogen pressure reducer Italy
Nitrogen pressure regulator

Optimax Jr. UV rechargeable lamp
Test kit forming gas
Test kit nitrogen

WAECO ACT-SRVCTL | Reference leak for electronic leak detectors

WAECO NITRO-DETECT | Hose set for nitrogen and forming gas pressure reducer
Sensor for electro leak detector
Leak detection & UV: find every leak fast
Which dye suits your system?
Dye is available for engine oil, transmission oil, coolant and refrigerant. Always check that the dye suits the fluid in the system. The wrong dye can cause damage. Also choose the right amount. Too little dye gives a weak signal. Too much can contaminate the system.
What to look for in a UV lamp?
A heavy-duty UV lamp makes small cracks visible. Check the power and wavelength. A lamp with high power works faster. Always wear UV safety glasses to protect your eyes. This helps you see the dye better and prevents eye damage.
Why use dye and UV lamp together?
Dye alone is not enough. Without a UV lamp, you cannot see the dye glow. The lamp reveals the leak, even in hard-to-reach areas. This helps you find the source quickly and avoid unnecessary dismantling. A good combination saves time and money.
If you use dye in the air conditioning system, choose the right UV dye and clean residues with UV remover. For small leaks in the air conditioning system, leak stop is a quick solution. Lubricate your compressor with compressor oil, PAG oil or POE oil and order your consumables from Oil & additives.