Puller spare parts
A puller lasts for years if you can replace the wearing parts. This category holds cross-arms, puller jaws, spindles, pressure pieces and repair kits by series. Every part belongs to a particular model, so the part number is your first point of reference. That number is engraved on the cross-arm of your puller. Write it down before you order anything, then you know it will fit. If you are unsure between two sizes, measure the thread of the spindle and the width of the cross-arm. For a complete new puller or another version, look at universal pullers.
KUKKO 20-2-T Cross-arm for 2-arm universal puller 20-2
KUKKO 22-01-G27-A Slide hammer attachment for Universal puller set 27-A
KUKKO 22-4-T Cross-arm for Counterstays 22-4
KUKKO 43-1-T Cross-arm for 2-arm universal puller with self-centring jaws 43-0-1, 43-1, 43-2, 27-A, 43-3, 43-001
KUKKO 229-100 Adapter for slide hammer 22-0-2
KUKKO 483-4-206 Mechanical spindle with glue clamps, Spring for 3-arm universal puller with Auto-Snap
KUKKO 844-250 Jaws 250 mm / 150 mm for the series 844 / 845
KUKKO 1294531 Lever for ball joint puller 129-5-45
KUKKO 022401 Support bolt with foot and knurl for counterstays 16-22, 25-C, 25-D, 22-4
KUKKO 12-2-206 Cross-arm inner bushes with spindle for 3-arm pullers "Alligator" with adjustable jaws 12-2
KUKKO 22-1-T Cross-arm for Counterstays 22-1
KUKKO 103-181 Spindle with nut for Hand screw clamp with wrench 103-180
KUKKO 210201 Complete clamping jaw for 2-arm Separator "Cobra" with adjustable clamping depth
KUKKO ET-6180760-K Spindle with T-bar handle for glue clamps VIRIDIS 469K1250-120, 469K0400-120, 469K1000-120, 493K0600-120, 493K0400-120, 493K2000-120
KUKKO 018530 Pulling bolts for extractors 15-E, 18-5, 18-5-B
KUKKO 14-1-T Cross-arm for 2-arm puller with quick adjustment, cross jaws with claw foot 14-01, 14-1
KUKKO 18-0-T Cross-arm for Extractor 15-K, 17-K, 18-0
KUKKO 30-1-T Cross-arm for 3-arm universal puller 30-1
KUKKO 69-B3 Bearing adapter (pair) for Ball bearing puller sets "Universal" 69-B3
KUKKO 112-1-T Cross-arm for 2-arm pullers for ball bearings 112-1, 112-10
KUKKO 140-S-E 5 replacement tips for micro puller
KUKKO 201-0-T Cross-arm for 2-arm universal puller with reversible jaws 41-3, 201-0, 205-00
KUKKO 222-1-250 Extension 250 mm for seal puller K-222
KUKKO 818-820 Cross-arm for pulling devices with hydraulic spindle 818-215, 820-0, 845-855, 845-858, 818-0, 818-100, 818-150
KUKKO ET-616072-HRT Spindle with wooden handle for glue clamps VIRIDIS with wooden handle
Puller parts: how to order the right one
Which part do you need?
Every puller has a part number. It is engraved on the cross-arm. Search on that number and you will find the matching part. If it is a cross-arm, the fit on the arms has to be right. With a puller jaw you check the shape of the jaw. A pressure piece belongs to the spindle size you are using.
Where ordering goes wrong
One spindle often looks like another, but the thread differs. Check the size of the spindle and the shape of the spindle tip. A wrong spindle will not fit or will damage your workpiece. With a cross-arm you look at the width and at the holes the arms drop into. Anyone who keeps using a puller with a worn cross-arm puts more force on the arms than needed.
Original or universal
An original part belongs to your puller and fits without any adjustment. Universal pullers often have their own series of cross-arms and jaws. For a puller with a hydraulic cylinder, the parts are not interchangeable with a hand-operated version. Look at internal pullers if you need to grip a bearing from the inside, or at slide hammers and counterstays for heavier work. A damaged puller jaw or a bent cross-arm is better replaced before you start on a seized bearing.
Repair kits and loose parts
Some series have repair kits with the parts that wear first. Loose cross-arms are ordered by model, such as the cross-arm for the 20-20. Put the part number of your puller in your records, then you will not have to search next time.