Puller spare parts
A puller lasts for years if you can replace the wearing parts. This category holds cross-arms, puller jaws, spindles, pressure pieces and repair kits by series. Every part belongs to a particular model, so the part number is your first point of reference. That number is engraved on the cross-arm of your puller. Write it down before you order anything, then you know it will fit. If you are unsure between two sizes, measure the thread of the spindle and the width of the cross-arm. For a complete new puller or another version, look at universal pullers.
KUKKO 015122 Side bolt with nut for separators 15-K, 15-0
KUKKO 20-1-T Cross-arm for 2-arm universal puller 20-1
KUKKO 30-10-T Cross-arm for 3-arm universal puller 30-10
KUKKO 015091 Side bolt with nut for separators 15-00
KUKKO 128-SW06 Pressure spindle for universal wiper arm puller 128-F-SW
KUKKO 017167 Side bolt with nut for separators 17-A, 17-1
KUKKO 022406 Spindle for Counterstays 22-4
KUKKO 18-2-T Cross-arm for Extractor 18-2-B, 15-B, 17-B, 18-2
KUKKO 56-3-M Spare chisel for splitting chisel grease-hydraulic 56-3
KUKKO 818-279 Pulling bolt for ball bearing puller set "Universal" 818-215, 69-C, 818-100, 818-150
KUKKO 017235 Side bolt with nut for separators 17-B, 17-2
KUKKO 20-20-T Cross-arm for 2-arm universal puller 20-20
KUKKO 55-0-M Spare chisel for single-cutting, mechanical nut splitter 55-0-C, 55-0
KUKKO 69-A2 Bearing adapter (pair) for ball bearing puller sets "Universal" 69-A2
KUKKO 139-107 Adjusting spindle for key puller for keys in slots 139-1
KUKKO 129456L Centre spindle for tie rod and push rod puller
KUKKO 022-306 Spindle for Counterstays 22-3
KUKKO 68-0-T Cross-arm for Combination extractor
KUKKO 015210 Side bolt with nut for separators K-20-15, 15-B, 818-215, 15-2, Y-215-2
KUKKO 17-0-06 Pressure spindle for separators with quick-clamp pressure spindle 17-0
KUKKO 45-3-T Cross-arm for 3-arm universal puller with self-centring jaws 45-3
KUKKO 69-A1 Bearing adapter (pair) for ball bearing puller sets "Universal" 69-A1
KUKKO 018070 Pulling bolts for extractors 68-0, 18-00
KUKKO 12-3-206 Cross-arm inner bushes with spindle for 3-arm pullers "Alligator" with adjustable jaws 12-3
KUKKO 44-5-206 Cross-arm insert bush with Spindle for 2-arm universal puller with self-centring jaws 44-5, 45-5
Puller parts: how to order the right one
Which part do you need?
Every puller has a part number. It is engraved on the cross-arm. Search on that number and you will find the matching part. If it is a cross-arm, the fit on the arms has to be right. With a puller jaw you check the shape of the jaw. A pressure piece belongs to the spindle size you are using.
Where ordering goes wrong
One spindle often looks like another, but the thread differs. Check the size of the spindle and the shape of the spindle tip. A wrong spindle will not fit or will damage your workpiece. With a cross-arm you look at the width and at the holes the arms drop into. Anyone who keeps using a puller with a worn cross-arm puts more force on the arms than needed.
Original or universal
An original part belongs to your puller and fits without any adjustment. Universal pullers often have their own series of cross-arms and jaws. For a puller with a hydraulic cylinder, the parts are not interchangeable with a hand-operated version. Look at internal pullers if you need to grip a bearing from the inside, or at slide hammers and counterstays for heavier work. A damaged puller jaw or a bent cross-arm is better replaced before you start on a seized bearing.
Repair kits and loose parts
Some series have repair kits with the parts that wear first. Loose cross-arms are ordered by model, such as the cross-arm for the 20-20. Put the part number of your puller in your records, then you will not have to search next time.