Repair Sets
A ratchet that slips or fails to engage usually needs a new pawl or spring. A repair kit contains the internal parts for the ratchet head. Choose the kit based on the tooth count and model of your ratchet. Check the specifications before ordering, as not every kit is universal. This makes your ratchet reliable again without buying a new one. The kits are suitable for hanging.
Torque Wrench Repair Kit | for BGS 962
Repair Kit for Ratchet Head | 6.3 mm (1/4") | for BGS 72113, 72114
3 pack sizes
1-2
Repair Kit for Ratchet Head | for BGS 211
Repair Kit for Ratchet Head | for BGS 213
Repair Kit for Ratchet Head | for BGS 227
Repair Kit for Ratchet Head | for BGS 2304
Repair Kit for Ratchet Head | for BGS 2315, 1204
Repair Kit for Ratchet Head | for BGS 232
Repair Kit for Ratchet Head | for BGS 302
Repair Kit for Ratchet Head | for BGS 303
Repair Kit for Ratchet Head | for BGS 303, 316, 319, 25106
Repair Kit for Ratchet Head | for BGS 304
Repair Kit for Ratchet Head | for BGS 315, 318, 25103, 25105
Repair Kit for Ratchet Head | for BGSs 317, 320, 324, 25104, 25107
Repair Kit for Ratchet Head | for BGS 355
Repair Kit for Ratchet Head | for BGS 356
Repair Kit for Ratchet Head | for BGS 357
Repair Kit for Ratchet Head | for BGS 600
Repair Kit for Ratchet Head | for BGS 601
Repair Kit for Ratchet Head | for BGS 602
Repair Kit for Ratchet Head | for BGS 618
Repair Kit for Ratchet Head | for BGS 619
Repair Kit for Ratchet Head | for BGS 620
Repair Kit for Ratchet Head | for BGS 635, 638
3 pack sizes
1-2Ratchet working like new
What to look for in a repair kit
A repair kit for your ratchet contains the internal parts that wear: the pawl, the spring and sometimes a retaining ring. The kit is specific to the number of teeth in your ratchet. Count the teeth on the ratchet head or look up the model. A kit for 72 teeth does not fit a ratchet with 36 teeth.
Why not every kit is universal
Ratchet heads differ by brand and type. The shape of the pawl and spring is not the same everywhere. Always check the specifications of your ratchet and compare them with the kit. If you choose the wrong kit, the ratchet will not engage properly and may still slip.
How to replace the parts
First remove the retaining ring or screw on the side of the head. Take out the old pawl and spring. Fit the new parts and apply a thin layer of grease. Then test the ratchet in both directions. Your ratchet will work reliably again, without buying a new one.
Does your ratchet no longer suit the job? Take a look at reversible ratchets or a special ratchet for awkward spots. For tight spaces a bit ratchet is handy, and on site you use a scaffolding ratchet. You will find the full range under ratchets.