Soft-Face Hammers
Choose a soft-face hammer by head diameter and weight. Larger heads spread the force, lighter hammers give precision, heavier ones pull out more dents. Non-rebound versions prevent bouncing off the panel. Handle and grip determine comfort. A hanging loop is useful in the shop.
Dead Blow Hammer Set | Soft Head | Ø 47 / 55 / 65 mm | 450 / 765 / 1275 g | 3 pcs.
Dead Blow Hammer | Soft Head | Ø 47 mm | 450 g
Dead Blow Hammer | Soft Head | Ø 55 mm | 765 g
Dead Blow Hammer | Soft Head | Ø 65 mm | 1275 g
Choosing Soft-Face Hammers for Dent Removal
Pick the Right Diameter and Weight
Soft-face hammers are used for removing dents in body panels. The diameter of the head determines how the blow spreads. A large head distributes the force over a bigger area. That works well for flat damage. A smaller head gives more precision on tight spots. The weight controls the striking force. Lighter hammers of 450 grams offer more control. Heavier models of 1300 grams deliver more power for stubborn dents.
What to Check When Ordering
Always check the version of the hammer. Non-rebound hammers prevent the head from bouncing back on the paint. That protects the surface from extra damage. Also look at the length of the handle and the grip. A longer handle gives more leverage but needs more space. An ergonomic grip reduces fatigue during long jobs. A hanging eye on the handle is useful for storage in the workshop.
Why Non-Rebound Matters
A standard hammer can bounce back after the strike. That causes unintended dents or scratches. Non-rebound versions absorb that energy. The hammer stays stable on the contact point. This is essential for fine dent repair. Always choose a non-rebound hammer when working on bodywork.
This tool belongs with Tyre Service, where you mount and balance tyres. Check your tread or brake lining with Vernier Callipers and keep the pressure right with Tyre Inflation. For moving wheels choose Tyre Transport, and for sensors in the wheel you need TPMS.