Blanking plug 10 mm

A plastic plug you push into a push-in fitting to close it off. It is held by the same gripper ring that normally holds the tube and takes full working pressure.

Use it on a port you do not need now but might need later. The fitting stays in place, the hole closes, and when you want it back it is a matter of pressing the ring.

Specifications

• Tube outside diameter: 10 mm
• Material: engineering plastic
• Working pressure: vacuum to 20 bar
• Temperature range: -20 to +80 °C
• Medium: compressed air and vacuum
• Series: Aignep 50610
• Manufacturer: Aignep, Bione (Italy)