Double banjo body 4 mm x 1/8" without hollow bolt

The same banjo body, but with two push-in ports facing each other. One hollow bolt then feeds two tubes from a single point on the machine.

The hollow bolt is not included and is not part of this range. The thread size in the name refers to the bolt. Both tubes share the same bore, so two consumers pulling at once will notice each other.

Specifications

• Tube outside diameter: 4 mm
• Thread size: 1/8"
• Thread type: fits a hollow bolt of this size
• Material: nickel-plated brass
• Working pressure: vacuum to 20 bar
• Temperature range: -20 to +80 °C
• Medium: compressed air and vacuum
• Series: Aignep 50510
• Manufacturer: Aignep, Bione (Italy)