Elbow plug-in fitting 10 mm

An elbow fitting with a stem instead of a thread. The stem clicks into an existing push-in fitting and the tube leaves at right angles.

That puts a bend on a port that comes out straight, without touching the port itself. On a valve mounted flat against a wall, that is often the only way to get the tube away.

Specifications

• Tube outside diameter: 10 mm
• Material: engineering plastic with nickel-plated brass thread
• Working pressure: vacuum to 10 bar
• Temperature range: 0 to +60 °C
• Medium: compressed air and vacuum
• Series: CDC PLJ
• Manufacturer: CDC Pneumatics (South Korea)