Elbow push-in union 14 mm

A ninety degree bend between two tubes of the same size. The bend is in the brass, not in the tube, so nothing can kink and the bore stays the same all the way through.

Use it where a line has to turn a corner and there is not enough room for the tube to sweep round. Rule of thumb: below about five times the tube diameter in bend radius, you want an elbow fitting.

Specifications

• Tube outside diameter: 14 mm
• Material: nickel-plated brass
• Working pressure: vacuum to 20 bar
• Temperature range: -20 to +80 °C
• Medium: compressed air and vacuum
• Series: Aignep 50130
• Manufacturer: Aignep, Bione (Italy)