Hose tail with male thread 3 mm x M5

A hose tail with a metric male thread underneath, to screw straight into a block, a valve or a cylinder. That puts the hose on a threaded port with no fitting in between.

Use sealing tape or a washer on the thread; the tail itself seals nothing on the thread side. Tighten on the hex, not on the barbed part, because that is where the barbs deform.

Specifications

• Hose bore: 3 mm
• Thread size: M5
• Thread type: metric male thread
• Material: plain brass
• Working pressure: vacuum to 10 bar
• Temperature range: -10 to +80 °C
• Medium: compressed air and vacuum
• Series: Aignep mini
• Manufacturer: Aignep, Bione (Italy)