Press-in push-in cartridge 6 mm

A push-in fitting with no body around it. The cartridge is pressed straight into a drilled hole, so the port lives in the part itself and nothing sticks out.

This is material for machine building and series work, not for a repair at the bench. You need a step drill to cut the seat to size and an assembly drift to press the cartridge in square. Both are in this range.

Specifications

• Tube outside diameter: 6 mm
• Material: nickel-plated brass
• Working pressure: vacuum to 20 bar
• Temperature range: -20 to +80 °C
• Medium: compressed air and vacuum
• Series: Aignep 55800
• Manufacturer: Aignep, Bione (Italy)