Straight hose tail connector 6 x 6 mm

Two hose ends joined, with a barbed tail on each side. The barbs stretch the rubber so it presses itself against the tail, and a clip around it keeps it there.

At this size, from 2 mm bore upwards, this is often the only way to extend a line. A push-in fitting only starts at 3 mm and is four times the size besides. Warm the hose end briefly if it goes on stiffly.

Specifications

• Hose bore: 6 x 6 mm
• Material: plain brass
• Working pressure: vacuum to 10 bar
• Temperature range: -10 to +80 °C
• Medium: compressed air and vacuum
• Series: Aignep mini
• Manufacturer: Aignep, Bione (Italy)