Straight plug-in reducer 10 mm stem to 4 mm push-in

A stem on one side, a push-in socket of a smaller size on the other. You click the stem into an existing fitting and push the thinner tube into the other end.

That reduces without undoing the existing fitting. If that one is buried deep in a machine, this is the difference between two minutes of work and half an hour of stripping down.

Specifications

• Stem outside diameter: 10 mm
• Push-in side: 4 mm
• Material: nickel-plated brass
• Working pressure: vacuum to 20 bar
• Temperature range: -20 to +80 °C
• Medium: compressed air and vacuum
• Series: Aignep 50700
• Manufacturer: Aignep, Bione (Italy)