Tee coupler with water stop 25 x 20 x 25 mm

A tee coupler whose branch is taken from the top of the through pipe. Condensate sits in the bottom of the line and so stays in the main instead of travelling down to the station.

This is the fitting for every downward drop. An ordinary tee takes the air at mid height, and then the water running along the wall goes straight into the branch with it.

Specifications

• Tube outside diameter: 25 x 20 x 25 mm
• Material: nickel-plated brass, aluminium from 63 mm upwards
• Working pressure: vacuum to 16 bar
• Temperature range: -20 to +80 °C
• Medium: compressed air and vacuum
• Series: Aignep Infinity
• Manufacturer: Aignep, Bione (Italy)