Wheel Bearings & Rubber Bushes
This category contains pull and press sets for removing and installing wheel bearings and rubber bushes. The kits include sleeves, drivers and spindles in various sizes. You can extract old bearings and press new ones squarely into the hub. Pay attention to the number of pieces and spindle length for your needs. Heavy-duty versions handle truck work. A storage case keeps parts organised.
Pull and Press Sleeve Kit | with 4 Spindles | 24 pcs.
Empty Case for BGS 1514
Spindle for Press and Pull Sleeve Kit | M10 x 2.0
Spindle for Press and Pull Sleeve Kit | M12 x 2.0
Spindle for Press and Pull Sleeve Kit | M14 x 2.0
Spindle for Press and Pull Sleeve Kit | M16 x 2.0
Bearing and Bush Driver Set | 10 pcs.
Handle from BGS 1522
Bearing and Bush Driver Set | 16 pcs.
Pressing Frame
Wheel Bearing Hub Unit Installing Tools Set | for VAG | Bearing unit Ø 62, 66, 72 mm
Replacement Spindle with ball bearing for BGS 6250
Front Axle Control Arm Bush Tool Set | for VW T5
Silent Bearing Tool Set | for BMW E38, E39 | 7 pcs.
Trailing Arm Bush Tool Set | Rear Axle Left | for Ford & Volvo
Trailing Arm Bush Tool | for Honda
Inner Wheel Bearing Puller Set | 40 - 62 mm | 8 pcs.
Silent Block Tool Set | for VAG
Spindle | for BGS 8253
Spindle Extension | for BGS 8253 | long version
Spindle Nut | for BGS 8253
Silent Block Tool Set | for Skoda Fabia, VW Polo
Wheel Bearing Tool for wheel Bearing Hub Unit | for VW | 72 mm
2 pack sizes · from €99.95
1-2
Replacement Spindle for BGS 8270, 8321, 8322, 8324, 9086
Wheel bearing replacement: choose the right set
Which size or version do you need?
A pull and press set contains sleeves, drifts and spindles in different sizes. The spindles have threads from M10 to M16. You use them to pull old bearings from the hub and press new ones straight in. Check the number of parts. A set with more parts covers more common bearing sizes. For heavy work, reinforced versions are available. They have thicker spindles and stronger sleeves.
Where does ordering go wrong?
The spindle length determines whether you reach deeper hub positions. Check the length before you order. A spindle that is too short will not pull the bearing fully from the hub. A spindle that is too long will not fit in the press. Also check the spindle thread. It must fit the puller or press you already have. Some sets include a storage case. That keeps all sleeves and spindles organised and protected.
Which standard matters?
There is no universal standard for bearing press sleeves. The sizes follow the bearing types you replace. Choose a set that covers common sizes, such as bearings for passenger cars and light commercial vehicles. Rubber bushes also have no fixed standard. The outer diameter and height differ per vehicle. A set with multiple bush and sleeve sizes helps you find the right combination. That way you replace the bush without damaging the axle.
This tool belongs with Gearbox, Axles & Steering. If you are working on the drive shaft itself, look at Drive Shafts & Wheel Hubs. To release a ball joint or work on a suspension spring & spring strut you often need a puller or press that you will find here. Secure the car first with Wheel Mounting.