Tool Trolley Tool Trays
These tool trays and modules keep your workshop trolley organised. They fit in drawers of various sizes and brands. Measure the inside width, depth, and height before ordering. Choose an empty tray to set up your own layout, or a ready-filled module for specific tasks such as brake servicing. You will always find the right tool. Check the dimensions carefully to avoid any mistakes.
Tool Tray 1/3: Combined Bit Set | 49 pcs.
Tool Tray 1/6: Engine Timing Tool Set | for Alfa Romeo 2.0 JTS
Tool Tray 1/3: Screwdriver T-Star (for Torx) | 5 pcs.
Tool Tray 3/3: Double Open End Spanner, Double Ring Spanner, Ratchet Wrench | adjustable | 28 pcs.
Tool Tray 1/3: Double Open End Spanner Set | 6 - 22 mm | 8 pcs.
Tool Tray 1/3: Extension Bar, Adaptor and Joint Set | 17 pcs.
Tool Tray 3/3: Locking Grip Pliers Set | 13 pcs.
Tool Tray 1/3: Combination Spanner Set | 6 - 22 mm | 12 pcs.
Tool Tray 1/3: Combination Spanner Set | 24 - 32 mm | 4 pcs.
Tool Tray 1/6: High Pressure Pump Sprocket Puller | for Hyundai & Kia
Tool Tray 1/3: Double Ring Spanner Set | 6 x 7 - 20 x 22 mm | deep offset Ends | 8 pcs.
Tool Tray 3/3: Special Tools for Tyre Service | 18 pcs.
Tool Tray 1/3, empty: 3 Storage Compartments | 408 x 189 x 32 mm
Tool Tray 1/3, empty: 5 Storage Compartments | 408 x 189 x 32 mm
Tool Tray 1/3, empty: 6 Storage Compartments | 408 x 189 x 32 mm
Tool Tray 1/3, empty: 7 Storage Compartments | 408 x 189 x 32 mm
Tool Tray 3/3: Socket Set | 64 pcs.
3 pack sizes
1-2
Tool Tray 1/3: Bit Socket Set | internal Hexagon | 12.5 mm (1/2") | 12 pcs.
Tool Tray 1/3: Screwdriver T-Star (for Torx) | 6 pcs.
Tool Tray 1/3: Oil Pan Sockets / Oil Filter Chain Wrench | 22 pcs.
Tool Tray 1/3: Screwdriver Set | 11 pcs.
Tool Tray 1/3: Knife and Shears Set | 6 pcs.
Tool Tray 1/3: Bit and Bit Socket Assortment | 27 pcs.
Tool Tray 1/3: Pliers Set | 3 pcs.
Tool Trolley Tool Trays
Tool trays for your tool trolley
Tool trays bring order to the drawers of your tool trolley. They come in fixed sizes: 1/6, 1/3, 2/3, 3/3 and XL. Each size fits a specific drawer width. Always measure the internal dimensions of your drawer first. This ensures the tray fits properly.
Narrow drawers and small modules
A 1/6 tray suits a narrow drawer. It holds items like a set of brass punches or a crowfoot wrench set. A 1/3 tray fills one third of the drawer. Ideal for a socket set with 6.3 mm (1/4") drive or a screwdriver set. These trays come in hard plastic or flexible foam. Check the height, as a ratchet needs more space than a loose socket.
Wide drawers and full coverage
A 2/3 tray leaves one third of the drawer free for larger items. Choose an empty tray to fill yourself or a complete set with open-end spanners. A 3/3 tray fills the full width of a standard drawer. Use it for large sets, such as an 80-piece socket set or special tools for tyre service. For extra wide drawers, choose the XL tray. It keeps large tool sets neatly in place, even with heavy parts.
Where ordering goes wrong
Many mechanics order a tray without measuring the drawer. The result: a module that does not fit or is too high. Always check the dimensions of both the tray and the drawer. Choose an XL module only for extra wide drawers. This prevents your tools from not fitting in your tool trolley. If you are unsure about the layout of your trolley, also check the accessories for your tool trolley.