Assembly drift for press-in cartridge 6 mm

The assembly drift you use to drive a press-in cartridge into its seat. The drift fits exactly in the cartridge bore and spreads the blow over the rim instead of the gripper ring.

Never strike the cartridge directly. The gripper ring and the seal sit at the top of the body, and one hammer blow in the wrong place ruins the fitting before it has ever seen air. One drift per cartridge size.

Specifications

• Tube outside diameter: 6 mm
• Material: steel
• Working pressure: vacuum to 20 bar
• Temperature range: -20 to +80 °C
• Medium: compressed air and vacuum
• Series: Aignep 55802
• Manufacturer: Aignep, Bione (Italy)