H14 spacer for pipe clip

A spacer that sets the pipe clip fourteen millimetres off the wall. That lets the run pass clear of a protruding edge, a section or a second line underneath.

It helps at assembly too: with some room between pipe and wall you can get a spanner on the union nut, and that is exactly the spot where you otherwise cannot.

Specifications

• Material: engineering plastic
• Working pressure: vacuum to 16 bar
• Temperature range: -20 to +80 °C
• Medium: compressed air and vacuum
• Series: Aignep Infinity
• Manufacturer: Aignep, Bione (Italy)