Non-sparking tools
Wrenches, sockets, pullers and hand tools in copper-beryllium or aluminium-bronze alloy: no spark on impact or on contact with steel. For filling stations, refineries, gas installations and anywhere ATEX applies.
KUKKO 1897F1208 Hexagon socket 1/2" x 8 mm, non-sparking
KUKKO 1897F1209 Hexagon socket 1/2" x 9 mm, non-sparking
KUKKO 1897F1210 Hexagon socket 1/2" x 10 mm, non-sparking
KUKKO 1897F1211 Hexagon socket 1/2" x 11 mm, non-sparking
KUKKO 1897F1212 Hexagon socket 1/2" x 12 mm, non-sparking
KUKKO 1897F1213 Hexagon socket 1/2" x 13 mm, non-sparking
KUKKO 1897F1214 Hexagon socket 1/2" x 14 mm, non-sparking
KUKKO 1897F1215 Hexagon socket 1/2" x 15 mm, non-sparking
KUKKO 1897F1216 Hexagon socket set 1/2" x 16 mm, non-sparking
KUKKO 1897F1217 Hexagon socket 1/2" x 17 mm, non-sparking
KUKKO 1897F1219 Hexagon socket 1/2" x 19 mm, non-sparking
KUKKO 1897F1222 Hexagon socket 1/2" x 22 mm, non-sparking
KUKKO 1897F1224 Hexagon socket 1/2" x 24 mm, non-sparking
KUKKO 1897F1227 Hexagon socket 1/2" x 27 mm, non-sparking
KUKKO 1897F1230 Hexagon socket 1/2" x 30 mm, non-sparking
KUKKO 1897F1232 Hexagon socket 1/2" x 32 mm, non-sparking
KUKKO 1006F1011 Double open-end spanner, 10/11 mm, non-sparking
KUKKO 1006F1213 Double open-end spanner, 12/13 mm, non-sparking
KUKKO 1006F1415 Double open-end spanner, 14/15 mm, non-sparking
KUKKO 1006F1617 Double open-end spanner, 16/17 mm, non-sparking
KUKKO 1006F1819 Double open-end spanner, 18/19 mm, non-sparking
KUKKO 1006F2022 Double open-end spanner, 20/22 mm, non-sparking
KUKKO 1005F022 Single open-end spanner, 22 mm, non-sparking
KUKKO 1005F030 Single open-end spanner, 30 mm, non-sparking
Working in explosive atmospheres
Where non-sparking tools are required
In areas with flammable gases or dust, a standard steel wrench can create a spark. This happens on impact or when it contacts steel. Non-sparking tools are made from copper-beryllium or aluminium-bronze alloys. These alloys prevent spark formation. You use them at petrol stations, refineries and gas installations, in short anywhere ATEX applies.
Which version you choose
You select non-sparking tools per application. For loosening and tightening bolts and nuts, use a wrench or a socket with a hexagon socket. A puller or slide hammer helps remove bearings and gears. Check the size of the socket and the drive, for example 1/2 inch. That ensures the tool fits your material.
Where ordering goes wrong
A common mistake is choosing a standard steel version for an ATEX zone. Always check that the tool is explicitly marked as non-sparking. Size matters too: a socket in the wrong size damages the bolt head. Measure the bolt or nut beforehand and compare with the specifications. This prevents ordering unsuitable tools.
This non-sparking range sits under tools and works best alongside hand tools for everyday jobs, pullers for removing bearings and gears and sockets for connecting your ratchet to the bolt or nut.