Non-sparking tools
Wrenches, sockets, pullers and hand tools in copper-beryllium or aluminium-bronze alloy: no spark on impact or on contact with steel. For filling stations, refineries, gas installations and anywhere ATEX applies.
KUKKO 1005F041 Single open-end spanner, 41 mm, non-sparking
KUKKO 1005F055 Single open-end spanner, 55 mm, non-sparking
KUKKO 1006F4650 Crosshead screwdriver PH1, non-sparking
KUKKO 1006F4651 Crosshead screwdriver PH2, non-sparking
KUKKO 1006F4652 Workshop screwdriver, flat tip 4.5x100, non-sparking
KUKKO 1006F4653 Workshop screwdriver, flat tip 8x150, non-sparking
KUKKO 836F1225 Ratchet 1/2 250 mm, non-sparking
KUKKO 201-1-F 2-arm puller with swivelling, reversible jaws, clamping range up to 150 mm, 85 mm clamping depth
KUKKO 201-2-F 2-arm puller with swivelling, reversible jaws, clamping range up to 220 mm, 130 mm clamping depth
KUKKO 202-1-F 3-arm puller non-sparking. 150x80mm
KUKKO 202-2-F 3-arm puller non-sparking. 220x130mm
KUKKO 345F050 Blacksmith hammer 500 g, non-sparking
KUKKO 1006F2528 Spatula, rigid 50 mm, non-sparking
KUKKO 721F250 Water pump pliers 250 mm, non-sparking
KUKKO 832F380 Adjustable wrench 380 mm jaw opening 46 mm, non-sparking
KUKKO 1006F2123 Hexagon key set 2-10 mm 8-piece, non-sparking
KUKKO 1006F2224 Side cutting pliers 165 mm, non-sparking
KUKKO 1006F2427 Drahthandbürste 4-reihig, non-sparking
KUKKO 1006F3236 Scraper without handle 100 mm, non-sparking
KUKKO 1006F4146 Cleaning tool 480 mm, non-sparking
KUKKO K-200-1-F 30-piece basic tool set with puller, non-sparking
KUKKO K-201-1-F 31-piece locksmith tool set with puller, non-sparking
KUKKO K-202-1-F 20-piece spray booth cleaning set with puller, non-sparking
KUKKO 1005F019 Single open-end spanner, 19 mm, non-sparking
Working in explosive atmospheres
Where non-sparking tools are required
In areas with flammable gases or dust, a standard steel wrench can create a spark. This happens on impact or when it contacts steel. Non-sparking tools are made from copper-beryllium or aluminium-bronze alloys. These alloys prevent spark formation. You use them at petrol stations, refineries and gas installations, in short anywhere ATEX applies.
Which version you choose
You select non-sparking tools per application. For loosening and tightening bolts and nuts, use a wrench or a socket with a hexagon socket. A puller or slide hammer helps remove bearings and gears. Check the size of the socket and the drive, for example 1/2 inch. That ensures the tool fits your material.
Where ordering goes wrong
A common mistake is choosing a standard steel version for an ATEX zone. Always check that the tool is explicitly marked as non-sparking. Size matters too: a socket in the wrong size damages the bolt head. Measure the bolt or nut beforehand and compare with the specifications. This prevents ordering unsuitable tools.
This non-sparking range sits under tools and works best alongside hand tools for everyday jobs, pullers for removing bearings and gears and sockets for connecting your ratchet to the bolt or nut.