Service unit spare parts
You buy service unit spare parts for AC machines. Check the thread pitch and coupling before ordering. 1/2 inch ACME is standard for recovery units, but 1/4 inch flare is also used. Ensure the part works with R134a or R1234yf. A wrong filter or seal causes leaks and downtime. Order hoses and valves that fit your exact unit model.
Cover ASC 6100 G
FMC ASC 1000 from SN 110000
FMC ASC 1000 up to SN 109999
FMC CARD HYBRID USB
FMC ASC2000 to SN 200000
FMC ASC 2500 LE
WAECO ASC-UPDT | Flash Memory Card, ASC 5000 RPA / ASC 5500 RPA
FMC ASC 5500 USB
Heating cable 580 ASC 1000
WAECO ASC-HBLT | Heating belt for charging cylinder, ASC 6100 G
WAECO ASC-HBLT | Heat belt, 75 x 482 mm, vertical refrigerant collectors, Ø 13-25 cm
WAECO ASC-HBLT | Heat belt, 60 x 350 mm, vertical refrigerant collectors, Ø 13-18 cm
WAECO ASC-HBLT | Heat belt, 130 x 300 mm, horizontal refrigerant collectors, Ø 13-28 cm
Pocket ASC 6300 G
Pocket ASC 6300 G LE
Pocket ASC 6400 G
Pocket ASC 6400 G LE
WAECO Printer ASC S7k | Thermal printer for ASC 7 series
WAECO ADAPT-FKIT | Repair set of 6 gaskets, accessory for A/C flush adapter kit II
FMC (empty)
WAECO ACT-THRM | Temperature probe for dual diagnostic thermometer
USB stick update ASC
WAECO HT 32 | Vacuum pump oil HT 32, 500 ml
Vacuum pump spark free ASC 5100 Your article No.Z-1.5C
Parts for A/C service stations
Parts for your A/C service station
Here you will find pumps, valves and distillation parts, housings and wheels and controls and electronics for your A/C service stations. Replace worn parts in time. This prevents downtime and leaks in your workshop.
Pumps, valves and distillation
The pumps, valves and distillation parts keep the refrigerant circuit running. Think of vacuum pumps, valves and distillation units. Check the connection size and the type of fluid. A pump for oil does not fit a refrigerant circuit.
Housing and wheels
A crack in the housing or a broken wheel stops your machine. Choose a replacement housing or new wheels with the right diameter and load capacity. Measure the height and width of the wheel. This keeps your machine stable and protected.
Controls and electronics
The controls and electronics manage the whole service process. Replace sensors, relays and circuit boards when they wear out or fail. Check the supply voltage and connection type. A wrong part damages the circuit board.
How to choose the right part
Measure the thread and coupling size of your machine before ordering. 1/2 inch ACME is the standard, but 1/4 inch flare also occurs. Check whether the part is suitable for R134a or R1234yf. In doubt? Measure with a caliper. This ensures the part fits.