Straight push-in union 12 mm

Two tubes of the same size joined in one straight line. Push both ends home and the gripper rings do the rest. Useful for extending a line, or for cutting out a damaged section and bridging the gap.

Cut the tube square before you push it in. An angled cut leaves the lip seal only half seated, and you find out about it when the compressor stops and the pressure drains away.

Specifications

• Tube outside diameter: 12 mm
• Material: engineering plastic with nickel-plated brass thread
• Working pressure: vacuum to 10 bar
• Temperature range: 0 to +60 °C
• Medium: compressed air and vacuum
• Series: CDC PU
• Manufacturer: CDC Pneumatics (South Korea)