Wrenches and screwdrivers
Slogging spanners and slogging ring spanners to DIN 133 and DIN 7444 for the heaviest bolts, hook wrenches to DIN 1810 for lock nuts, hex and Torx keys in metric and inch, and watchmaker's screwdrivers for fine work.
KUKKO 1900-75 Europeans
KUKKO 133-95 Slogging open-ended spanner (DIN 133)
KUKKO 250-550 Watchmaker's screwdriver set in wooden case
KUKKO 250-600 Watchmaker's screwdriver set in wooden case
KUKKO 250-045 Phillips watchmaker's screwdriver
KUKKO 250-545 Watchmaker's screwdriver set
KUKKO 133-120 Slogging open-ended spanner (DIN 133)
KUKKO 1900-50 Europeans
KUKKO 250-044 Phillips watchmaker's screwdriver
KUKKO 76-1 Hook wrench DIN 1810 Form A with nose for lock nuts with outside diameters 12-14 mm
KUKKO 76-2 Hook wrench DIN 1810 Form A with nose for lock nuts with outside diameters 16-20 mm
KUKKO 76-3 Hook wrench DIN 1810 Form A with nose for lock nuts with outside diameters 25-28 mm
KUKKO 76-4 Hook wrench DIN 1810 Form A with nose for lock nuts with outside diameters 30-32 mm
KUKKO 76-5 Hook wrench DIN 1810 Form A with nose for lock nuts with outside diameters 38-45 mm
KUKKO 76-6 Hook wrench DIN 1810 Form A with nose for lock nuts with outside diameters 40-42 mm
KUKKO 76-7 Hook wrench DIN 1810 Form A with nose for lock nuts with outside diameters 45-50 mm
KUKKO 76-8 Hook wrench DIN 1810 Form A with nose for lock nuts with outside diameters 52-55 mm
KUKKO 76-9 Hook wrench DIN 1810 Form A with nose for lock nuts with outside diameters 58-62 mm
KUKKO 76-10 Hook wrench DIN 1810 Form A with nose for lock nuts with outside diameters 68-75 mm
KUKKO 76-11 Hook wrench DIN 1810 Form A with nose for lock nuts with outside diameters 80-90 mm
KUKKO 76-12 Hook wrench DIN 1810 Form A with nose for lock nuts with outside diameters 95-100 mm
KUKKO 76-13 Hook wrench DIN 1810 Form A with nose for lock nuts with outside diameters 98-105 mm
KUKKO 76-14 Hook wrench DIN 1810 Form A with nose for lock nuts with outside diameters 110-115 mm
KUKKO 76-15 Hook wrench DIN 1810 Form A with nose for lock nuts with outside diameters 120-130 mm
Slogging Open-Ended and Ring Spanners
Which size and type you need
For heavy bolts and nuts, choose a slogging open-ended spanner or a slogging ring spanner. The open-end spanner grips quickly and works in tight spaces. The ring spanner surrounds the nut completely and prevents slipping. Both are available in metric and inch. Check the size of the bolt or nut before you order.
Where ordering goes wrong
Many mechanics order a set and then find the sizes do not match their work. Always measure the nut or bolt, not the socket or spanner you already have. Slogging open-ended spanners and ring spanners come in sizes from 8 to 60 millimetres. Choose the right size and you avoid damaging the bolt.
Why DIN 133 and DIN 7444 matter
These standards guarantee the spanner can withstand the blows of an impact wrench. DIN 133 applies to the open-end spanner, DIN 7444 to the ring spanner. If you use a cheap spanner without a standard, it can break. That costs time and can cause injury. Always choose a spanner that meets the standard.
This is part of tools and sits within hand tools. Tighten your bolts with a torque wrench from torque tools, put your socket on a ratchet from ratchets and extensions and use sockets when the bolt sits in an awkward spot. Screws that no spanner will take are best handled with bit sockets and bits.