Wrenches and screwdrivers
Slogging spanners and slogging ring spanners to DIN 133 and DIN 7444 for the heaviest bolts, hook wrenches to DIN 1810 for lock nuts, hex and Torx keys in metric and inch, and watchmaker's screwdrivers for fine work.
KUKKO 401-TX27 Torx key with TX27 Across flats, short
KUKKO 401-TX30 Torx key with TX30 Across flats, short
KUKKO 401-TX40 Torx key with TX40 Across flats, short
Ball-end hex keys with locking ball, 10 mm across flats
KUKKO 295-030 Ball-end hex keys with holding ball, 3 mm across flats
KUKKO 295-040 Ball-end hex keys with holding ball, 4 mm across flats
KUKKO 295-050 Ball-end hex keys with holding ball, 5 mm across flats
KUKKO 295-060 Ball-end hex keys with holding ball, 6 mm across flats
KUKKO 295-080 Ball-end hex keys with holding ball, 8 mm across flats
KUKKO 293-015 Colour-coded ball-end hex keys, 1.5 mm across flats Red
KUKKO 293-020 Colour-coded ball-end hex keys, 2 mm across flats Dark blue
KUKKO 293-025 Colour-coded ball-end hex keys, 2.5 mm across flats Blue
KUKKO 293-030 Colour-coded ball-end hex keys, 3 mm across flats Turquoise
KUKKO 293-040 Colour-coded ball-end hex keys, 4 mm across flats dark green
KUKKO 293-050 Colour-coded ball-end hex keys, 5 mm across flats Green
KUKKO 293-060 Colour-coded ball-end hex keys, 6 mm across flats Yellow
KUKKO 293-080 Colour-coded ball-end hex keys, 8 mm across flats dark yellow
KUKKO 293-100 Colour-coded ball-end hex keys, 10 mm across flats Orange
KUKKO 250-012 Grooved watchmaker's screwdriver
KUKKO 250-014 Grooved watchmaker's screwdriver
KUKKO 291-A/9 Hex keys set in plastic clip, 1.5 -10 mm, 9-piece
KUKKO 292-A/9 Hex keys set in plastic clip, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm across flats 9-piece
KUKKO 293-A/9 Hex keys set, ball-end and colour coding in plastic holder, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm across flats multicolour
KUKKO 294-A/9 Set Hex keys in plastic clip with 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm across flats
Slogging Open-Ended and Ring Spanners
Which size and type you need
For heavy bolts and nuts, choose a slogging open-ended spanner or a slogging ring spanner. The open-end spanner grips quickly and works in tight spaces. The ring spanner surrounds the nut completely and prevents slipping. Both are available in metric and inch. Check the size of the bolt or nut before you order.
Where ordering goes wrong
Many mechanics order a set and then find the sizes do not match their work. Always measure the nut or bolt, not the socket or spanner you already have. Slogging open-ended spanners and ring spanners come in sizes from 8 to 60 millimetres. Choose the right size and you avoid damaging the bolt.
Why DIN 133 and DIN 7444 matter
These standards guarantee the spanner can withstand the blows of an impact wrench. DIN 133 applies to the open-end spanner, DIN 7444 to the ring spanner. If you use a cheap spanner without a standard, it can break. That costs time and can cause injury. Always choose a spanner that meets the standard.
This is part of tools and sits within hand tools. Tighten your bolts with a torque wrench from torque tools, put your socket on a ratchet from ratchets and extensions and use sockets when the bolt sits in an awkward spot. Screws that no spanner will take are best handled with bit sockets and bits.