Bit Socket Sets
This category holds insulated bit socket sets and bit assortments rated for work on live parts up to 1000 V. Choose by drive size (1/4", 3/8" or 1/2"), profile and number of pieces. Make sure the entire tool, including the bit and holder, is insulated. That prevents shortcuts in safety. Select the right profile: Torx, Phillips, Pozidriv or hex, and get a set that covers your typical jobs.
VDE Bit Socket Set | 12.5 mm (1/2") Drive | T-Star (for Torx) T20 - T55 | 10 pcs.
VDE Bit Socket Set | 10 mm (3/8") / 12.5 mm (1/2") Drive |Internal Hexagon 4 - 10 mm | 10 pcs.
Tool Tray 2/3: VDE Bit Socket Set | 10 mm (3/8") / 12.5 mm (1/2") Drive | Internal Hexagon 4 - 10 mm | 10 pcs.
Safe work with insulated bit sockets
Choose the right drive and version
Bit socket sets for high voltage come with 1/4", 3/8" and 1/2" drives. The drive determines which ratchet or socket you fit the bit to. Check the profile as well: Torx, Phillips or hex socket. That way you always have the right bit for the screw or bolt.
Full insulation is essential
When working on live parts up to 1000 V, only fully insulated tools count. The bit, the holder and the transition to the ratchet must all be insulated. A bit with only an insulated outer layer does not offer enough protection. Inspect the insulation for damage before use.
What to consider when ordering
The number of parts tells you about versatility, but not about the quality of the insulation. Choose a set that matches the jobs in your workshop. For high-voltage work, you need bit sockets that comply with the standard for insulated tools, such as IEC 60900. That way you know you are working safely.
These bit socket sets sit under High-Voltage & Insulated Tools. Would you rather use a single socket bit or start with a reversible ratchet with an insulated handle? With extensions you reach bolts that sit deeper. For a complete setup, choose a tool assortment.