Deburring tool for aluminium air pipe

Takes the burr off a sawn pipe end and puts a light chamfer on it. That is not finishing but necessity: the burr left on the inside after sawing slices the fitting O-ring open the moment you push the pipe in.

That gives you a leak you cannot see, one you only notice when the compressor cuts in more often than it should. Two turns of this tool prevent it.

Specifications

• Material: steel
• Working pressure: vacuum to 16 bar
• Temperature range: -20 to +80 °C
• Medium: compressed air and vacuum
• Series: Aignep Infinity
• Manufacturer: Aignep, Bione (Italy)