HSS step drill for press-in cartridge 10 mm

The step drill that cuts the seat for a press-in cartridge. It drills the bore and the counterbore in one pass, so diameter and depth are guaranteed to match.

Without this drill the cartridge will not seal: the seal relies on an exact seat, and a hole made with two separate drills almost always runs a few hundredths off centre. One drill per cartridge size.

Specifications

• Tube outside diameter: 10 mm
• Material: steel
• Working pressure: vacuum to 20 bar
• Temperature range: -20 to +80 °C
• Medium: compressed air and vacuum
• Series: Aignep 55801
• Manufacturer: Aignep, Bione (Italy)