Release tool for push-in fittings 14 to 4 mm

A flat steel key with cut-outs for pressing the release ring. Fingers do fine on a fitting in the open, but not on one wedged between two others inside a machine.

Put the cut-out over the tube against the ring, press evenly and pull the tube straight back. Levering does not help and damages the gripper ring, after which the same tube will not seal in it again.

Specifications

• Suitable for: 14 to 4 mm
• Material: steel
• Working pressure: vacuum to 20 bar
• Temperature range: -20 to +80 °C
• Medium: compressed air and vacuum
• Series: Aignep 50990
• Manufacturer: Aignep, Bione (Italy)