Sandblasting Equipment
Sand blasting removes rust, paint, and scale using compressed air and abrasive. Check the air consumption against your compressor's output. Match the air connection and working pressure. Some models have a hanging eye for storage. The grit hopper capacity determines how long you work. Choose nozzles for fine or coarse work. Spare parts and extra grit are available.
Replacement Nozzle for Art. 3243
Sandblast Bag for BGS 3243
Pneumatic Sandblaster
Spare Steel Tip for BGS 3244
Pneumatic Soda Spray Gun | 1 l
Air Sander
Replacement Nozzle | 6 mm | for BGS 8382
Pneumatic Sand Blasting Cabinet
Replacement Sandblasting Gun for BGS 8717
Replacement Gloves for Sandblasting Cabinet | for BGS 8717
Protective Foil | for BGS 8717
Replacement Air Filter for Sandblasing Cabinet | for BGS 8717
Pneumatic Sand Blasting Cabinet | large
Spare Nozzles | 4, 5, 6, 7 mm | for BGS 8841
Spare Gloves | for Pneumatic Sand Blasting Cabinet | for BGS 8841
Protective Foil | for BGS 8841
Replacement Nozzle for Air-Sandblaster | 4 pcs. | for BGS 8989
Pneumatic Sandblaster incl. Accessories | 3 pcs.
Pneumatic Sandblaster incl. Accessories | 3 pcs.
Pneumatic Sandblaster incl. Accessories
Sand Blasting in the Workshop
Choose the right type
Sand blasting equipment works with compressed air and grit. You need a compressor that delivers enough air. Check the air consumption of the gun, stated in litres per minute. A compressor that is too small gives a weak blast. The job then takes much longer.
Where ordering goes wrong
Check the connection on your compressed air system. Most guns have a 6.3 mm connection or another size. Working pressure also matters, usually between 6 and 8 bar. If the connection does not fit, you need an adapter. Also look at the capacity of the grit container. A small container needs refilling more often.
Which standards and sizes count
For fine work, use fine grit. For coarse work, such as rust removal, choose coarser grit. Nozzles come in different diameters. A smaller diameter gives a finer stream. Replacement nozzles and extra blasting grit are available separately. This keeps your equipment usable for a long time.
Sand blasting equipment sits under air tools, alongside other tools that run on your compressor. If you prefer a different kind of blasting, look at air blow guns or at sanders for flattening and polishing. Connecting your set often calls for air tool accessories, and for coarser blasting on metal, bodywork fits well with this job.