Trims and Panels
Remove trims and panels without damage using the right tools. Choose plastic wedges for delicate surfaces. Use steel clip removers for stubborn fasteners. A set with various wedges and levers covers all common clips. Pay attention to the handle: an ergonomic grip won't slip. This way you avoid damaging everything with a screwdriver. These tools help you to detach panels and mouldings quickly, and refit them tightly.
Needle and Hook Set | 9 pcs.
Trim Strip Set | various Shapes | with Rivet Removal Pliers | 6 pcs.
Interior Lining and Clip Removal Tool Set
Car Interior Lining Set | 11 pcs.
Special Clip Remover Set | 5 pcs.
Edge Protection and Sealing Rubber Loosener
Lead Perlon Cable | 15 m x 3 mm
Trim Strip Set | various Shapes | 5 pcs.
Trim Strip Wedge with Hole | 100 x 45 mm
Door Trim Removing Tool | 235 mm
3 pack sizes · from €10.31
1-2
Door Trim Removing Tool | 290 mm
Door Trim Pliers
Plastic Double Ring Spanner & Pry Bar Set | 5 pcs.
Door Handle Dismantling Tool | for VAG
Miniature Hook Set | 4 pcs.
Interior Cladding Hooks | universal
Hook Set | 4 pcs.
Needles, Hooks and Scrapers Set | 9 pcs.
Trim Strip Wedge / Scraper Set | 27 pcs.
Hook Set with straight and rounded Tips | 8 pcs.
Panel Removal Wedge Set for VW | 3 pcs.
Hook Set with rounded tips | 4 pcs.
Panel Clip Pliers | 175 mm
3 pack sizes · from €18.84
1-2
Grab Handle Release Tool | for VAG
Trim and panel removal tools
Which size or type do you need?
For removing trims and interior panels, you can choose between plastic wedges and steel clip removers. Plastic wedges are suitable for delicate surfaces. They do not scratch. Steel clip removers handle tough clips. Check the shape of the clip. A set with different wedges and levers covers most clips.
What goes wrong when ordering?
Many mechanics order a single wedge. That is not enough for a whole panel. You need different shapes. A set with various wedges and levers works quicker. Also check the handle. An ergonomic handle does not slip. This way you work neater than with a screwdriver. A screwdriver damages the panel quickly.
Which standard matters?
There is no fixed standard for this tool. You see the quality in the material. Plastic must be flexible, not brittle. Steel parts must be hardened. This makes them last longer. Choose tools that fit the clip type in your workshop. This way you remove panels without damage.
This tool belongs with body and interior. If you move on to repairing bodywork, take a look at car body repair. If a disc has to come out before you release a panel, use fitting and removing discs. For small dents without painting there is smart repair. And if wiper arms are in the way, the pullers from wiper and wiper arm will help.