Body & Interior
You choose interior tools for trim, clips and rubber seals. They prevent damage when removing upholstery and door rubber. Look at the clip shape and the width of the gap. Use wedges for wide gaps and angled pry bars for tight spaces. Check that the tool matches the OEM number of your car. Consider length and grip for safe work.
Dashboard Protector | 4 pcs.
Needle and Hook Set | 9 pcs.
Pole Terminal and Wiper Arm Puller, 2-arm
Hand Grinder | 105 x 210 mm
Extractor for BGS 865
Door Pin | 5 x 115 mm
Windscreen Wiper Arm Puller | 26.5 mm | for Audi Q7
Trim Strip Set | various Shapes | with Rivet Removal Pliers | 6 pcs.
Spray Bottle | empty | for BGS 865
Body Repair Set | 7 pcs.
Locking Clamp for Hood and Trunk Openers
Interior Lining and Clip Removal Tool Set
Door Hinge Tool Set | 8 pcs.
Rubber Suction Lifter | ABS | Ø 55 mm
2 pack sizes
1-2
Windscreen Wiper Arm Puller | 15 mm | for Audi
Sliding Hammer | for BGS 865
Emergency Car Opening Set
Reflectorboard for Smart Repair | yellow
2 pack sizes
1-2
Car Interior Lining Set | 11 pcs.
Rubber Twin Suction Lifter | ABS | Ø 120 mm | 325 mm
Windscreen Wiper Arm Puller | for Honda, Opel / Vauxhall, VW
Body Repair Set | 7 pcs.
Body Hammer | round, flat Head / tip, tapered fin
3 pack sizes
1-2
Special Clip Remover Set | 5 pcs.
Body & Interior Tools
Body & interior tools
This category contains the specialist tools for damage repair, interior work and disc replacement. You will find everything for removing panels, pulling dents and fitting discs.
Repairing dents and damage
For repairing dents without respraying, use smart repair (PDR) tools. Dent pulling rods and glue puller kits straighten the dent from inside or outside. For larger damage to bodywork, use car body repair tools. Filling knives and sanding blocks prepare the surface for the repair.
Removing trims and panels
To release trims and interior panels without damage, use special wedges and levers. Plastic wedges are suitable for delicate surfaces. Steel clip removers release fixing clips without breaking them. When replacing a door lock or hinge, you need door and locking system tools. Always choose based on the OEM number.
Discs and wiper arms
To cut out discs, use cutting wire and pull handles. Saw through the adhesive layer while a counterstay tensions the wire. Choose the wire length based on the disc circumference. Replacing wiper arms? Use wiper arm pullers. A universal puller with adjustable clamping depth removes seized arms from the spindle without damage.
Selection guide
For a dent without paint damage, choose smart repair. For panels and trims, use wedges and clip removers. For disc replacement, you need cutting wire and pull handles. For a seized wiper arm, use a puller. This way you always have the right tool for the job.