Drill jig for saddle tap 32 mm

The jig that clamps around the pipe and holds the cutter square to the wall. Without it the cutter walks off the round surface as you start, and the hole is at an angle before you notice.

One jig per pipe size, because it has to fit the pipe tightly to guide the cutter. Clamp it firmly and cut steadily; forcing it makes the cutter skip.

Specifications

• Tube outside diameter: 32 mm
• Material: steel
• Working pressure: vacuum to 16 bar
• Temperature range: -20 to +80 °C
• Medium: compressed air and vacuum
• Series: Aignep Infinity
• Manufacturer: Aignep, Bione (Italy)