Brushes
Choose a brush based on your tool and the surface. Measure the shaft size first. Cup and disc brushes take a 6 mm shaft or a specific arbor. Steel wire cuts through heavy rust and weld slag. Brass is gentler and leaves no marks on polished steel. Nylon brushes work on paint and dirt. Take a hand brush for controlled work. Always check the brush diameter. An oversized brush vibrates dangerously in the tool.
Brush Attachment | for BGS 74367 | Ø 100 mm (4")
Brush Attachment | for BGS 74367 | Ø 100 mm (4")
Brush Attachment | for BGS 74367 | Ø 125 mm (5")
Brush Attachment | for BGS 74367 | Ø 50 mm (2")
Brush Attachment | for BGS 74367 | Ø 90 mm (3.5")
Diesel Injector Cleaning Brush Set | 3 pcs.
Hole Cleaning Brush Set | 6 pcs.
Steel Wire Brush Set | wooden handle | 2, 3, 4 rows | 3 pcs.
Grinding / Polishing Discs and Brush Attachment Set | for Drills | 16 pcs.
Wire Brush and Abrasive Flap Wheel Set | 10 pcs.
Synthetic Bristles Corner Cleaning Brush Set | 230 mm | 3 pcs.
Lawnmower Brush | with Scraper
Scrubbing Brush Set | 2 pcs.
Hand Brush | PET / Coconut Coir | 300 mm
Weed Wire Brush | short Handle | with Scraper | 300 mm
Bicycle Cleaning Brush Set | 4 pcs.
Handheld Brush | steel wire | 4-rows | 260 mm
Brush Set | 20 pcs.
2 pack sizes
1-2Choose the right brush for your workshop
Pick the right type
Brushes come in three types. A hand brush removes loose rust and dirt. A cup brush fits a drill or angle grinder. A disc brush mounts on an angle grinder. First check the connection. Cup brushes have a 6 mm shaft. Disc brushes have a 22.23 mm bore for an angle grinder. Measure the brush diameter. A disc brush that is too large will not fit under your guard.
Mind the brush material
Steel tackles rust and weld seams hard. Brass is softer and leaves no scratches on mild steel. Nylon cleans green and wood without damaging metal. For aluminium, use brass or nylon. Use steel only on steel and cast iron. This prevents damage to the workpiece.
Where ordering goes wrong
Many mechanics order a brush without checking the connection. A cup brush with a 6 mm shaft will not fit a drill with a 10 mm chuck without an adapter. A disc brush with a 22.23 mm bore will not fit an angle grinder with an M14 thread. Check the diameter too. A 150 mm disc brush will not fit a guard for 125 mm. Always measure the connection and the diameter.
Brushes belong with your hand tools, along with what you use around them. For tightening and loosening bolts and nuts you reach for spanners or ratchet wrenches. When you fasten or loosen something, you pick up screwdrivers or hex and Torx keys.