High-Voltage & Insulated Tools
Insulated tools are essential when working on electrical installations and high-voltage components. Our range includes screwdrivers, ring spanners, flat wrenches and pliers with an insulation layer that meets DIN EN 60900. They are tested for voltages up to 1000 volts and feature clear insulation markings. Choose individual tools for specific spanner sizes or full sets. We also offer insulation materials like tape to protect connections. Pay attention to the certification and the correct profile for your application. This way you work safely and efficiently on live systems.
VDE Socket and Bit Socket Set | 10 mm (3/8") Drive | 19 pcs.
VDE Socket, Hexagon | 10 mm (3/8") Drive | 22 mm
14 pack sizes · from €14.35
1-2
VDE Insulating Tape Roll | 15 m
VDE Reversible Ratchet | 10 mm (3/8") | 1000 V
VDE Reversible Ratchet | 12.5 mm (1/2") | 1000 V
VDE Screwdriver Set | extra slim Tip | 6 pcs.
2 pack sizes
1-2
VDE Extension Bar | 12.5 mm (1/2") | 125 mm
Frequently asked questions about High-Voltage & Insulated Tools
Answers to the most common questions from our customers
Insulated tools are tested up to 1000 volts AC and 1500 volts DC. These ratings are printed on the insulation. Never exceed these values, even briefly. The tools are intended for work on live parts up to that limit.
Certified tools carry the marking DIN EN 60900. The handle often shows the maximum voltage and a double-square symbol. Also look for the words 'insulated' and the manufacturer's logo. These marks confirm compliance with the standard.
Electric vehicle batteries often operate at 400 volts or more. Insulated tools to DIN EN 60900 are suitable for such systems. However, always follow the safety instructions from the vehicle manufacturer. Only trained personnel should work on high-voltage systems.
The standard does not require an official certification repeated regularly, but you must visually inspect the tools before every use. Look for cracks, deformation or wear. Employers may enforce their own inspection times. Follow the policy of your workplace.
A rubber grip only provides handling comfort. It does not insulate. Insulated tools have a thoroughly tested insulation layer that protects against high voltages. Only tools marked to DIN EN 60900 are safe for live work.
Insulated Tools for High Voltage
Working safely on live parts
Working on high voltage requires insulated tools that protect against electric shocks. These tools have an insulation layer tested up to 1000 volts AC. The DIN EN 60900 standard requires the insulation to withstand 10,000 volts per stroke. Never use standard tools on live parts. Even at low voltage, things can go wrong.
Sockets, ratchets and extensions
For turning bolts and nuts, use insulated socket bits or an insulated ratchet. The drive determines which sockets you use. Versions have a square drive of 6.3 mm (1/4 inch), 10 mm (3/8 inch) or 12.5 mm (1/2 inch). With insulated extensions you can also reach recessed bolts. Choose the length that fits the location where you work.
Screwdrivers, spanners and pliers
For screw connections, use insulated screwdrivers with a flat, Phillips or Torx profile. The insulation runs right up to the tip. For open connections, insulated spanners are suitable. They come as open-end, ring or combination spanners. The across flats range from 6 to 32 millimetres. For cutting, crimping or gripping wires, use insulated pliers. Make sure the handles have full insulation.
Complete sets and special tools
An insulated tool assortment is handy for general work on installations. The number of parts determines if you are complete. An insulated bit socket set combines sockets with bits in one set. For jobs that standard tools cannot handle, you will find in special tools insulated hooks, magnetic pick-up tools and insulating tape.
Selection guide
For general high-voltage work, choose a complete set. For a specific job, buy individual tools. Always check for cracks or scratches before use. Replace damaged tools immediately. This keeps you working safely.