Threading Tools
Thread cutting tools let you create or repair threads. Choose a tap for internal threads and a die for external. Sets contain several sizes with a storage case. Check the pitch and the material you will cut. Stainless steel requires a different grade than plain steel. Use a tap wrench or a die holder to keep control.
Tap Adaptor Socket | 6.3 mm (1/4") Drive | 4.6 mm
Tap and Die Set | M2 - M18 | 110 pcs.
Thread Repair Kit | M14 x 1.25 | 14 pcs.
Empty Case for BGS 1900
Thread Repair Kit | M10 x 1.0 | 14 pcs.
Thread Cutting Set | M3 - M12 | 21 pcs.
Replacement Thread Inserts | M10 x 1.0 | 25 pcs.
Die Holder Set | 10 mm (3/8") / 12.5 mm (1/2") Drive | 4 pcs.
Tap and Die Set | M3 - M12 | 32 pcs.
Thread Repair Kit | M12 x 1.25 | 14 pcs.
Die Holder | 10 mm (3/8") Drive | 20 mm
Die Holder | 10 mm (3/8") Drive | 25 mm
Die Holder | 12.5 mm (1/2") Drive | 38 mm
Die Holder | 12.5 mm (1/2") Drive | 50 mm
Drill / Tap and Die Set | HSS-G | 7 pcs
Replacement Thread Inserts | M5 x 0.8 | 25 pcs.
Metal empty Case for BGS 1926
Replacement Thread Inserts | M6 x 1.0 | 25 pcs.
Tap and Die Set | M3 - M12 | 44 pcs.
Replacement Thread Inserts | M8 x 1.25 | 25 pcs.
Replacement Thread Inserts | M10 x 1.5 mm | 25 pcs.
Thread cutting/HSS Drill Set | M3 - M12 / 2.5 - 10.2 mm | 16 pcs.
Replacement Thread Inserts | M12 x 1.75 | 10 pcs.
Tap Wrench for BGS 1987
Threading Tools
Threading tools
This category covers everything you need to cut and repair threads. Use a tap for internal threads. Use a die for external threads. The tools are divided into seven groups: taps, dies, holders, repair kits, files, sets and accessories.
Taps and dies
Taps come in sets of three: taper, plug and bottoming. This lets you cut an internal thread in one pass. Choose the tap based on the bore and the pitch. The same applies to threading dies. These cut external threads on a bolt or shaft. Always check the diameter and pitch. A wrong choice gives a poor fit.
Holders and repair
A tool holder clamps the tap or die securely. A tap wrench grips the tap, a die stock holds the die. This keeps the tool square to the workpiece. If the thread is damaged, use thread repair tools. These restore the original size. First measure the pitch and diameter of the existing thread.
Files, sets and accessories
A thread file repairs minor damage to internal and external threads. Choose the pitch for metric, SAE or Whitworth. For the workshop, assortments are practical. They contain multiple tap and die sizes in one case. With accessories such as thread pitch gauges you check the pitch of an existing thread. This ensures you always pick the right size.
How to choose
For a new internal thread, choose a tap set. For a new external thread, choose a die. If the thread is damaged, use a repair kit or thread file. Make sure you have the right holder. With the wrong tool you will break the tap or get a rough thread.