Body & Interior
You choose interior tools for trim, clips and rubber seals. They prevent damage when removing upholstery and door rubber. Look at the clip shape and the width of the gap. Use wedges for wide gaps and angled pry bars for tight spaces. Check that the tool matches the OEM number of your car. Consider length and grip for safe work.
Windshield Holder | with Suction Pads
Silicon Water Remover | flexible | 300 mm
Hook Set with rounded tips | 4 pcs.
Hydraulic Cylinder for BGS 1689 | 10 t.
Silicon Water Remover | with Handle | 300 mm
Suction Plate | Ø 130 mm | for BGS 8460
Panel Clip Pliers | 175 mm
3 pack sizes · from €18.84
1-2
Window Cutting Wire | knotted | 25 m
Induction Heating Dent Repair Kit
Spreader for BGS 1688, 1689
Grab Handle Release Tool | for VAG
Induction Heating Dent Repair Kit | 1200W | for Iron and Non-Iron Metals
Empty Case for BGS 1689
Windshield Installation Frame | with Swivable Suction Cups
Assembly Wedge Set | 5 pcs.
Windshield Seal Nylon Cutting Wire | 50 m | 115 daN
Panel Beating Hammer | Head Ø 30 mm
Single Hand Rubber Suction Lifter | ABS | Ø 70 mm
Hook Set for Disassembly of Mercedes Dashboards | 2 pcs.
Plastic Replacement Head | yellow | Ø 30 mm | for BGS 1864
Claw for Car Body Alignment | 120 mm | two directions of pull | max. 5 t, side 3 t
Windshield Seal Cutting Wire | 25 m | 200 daN
Hook Set | extra long | 245 mm | 6 pcs.
Windscreen Removal Set | 7 pcs.
Body & Interior Tools
Body & interior tools
This category contains the specialist tools for damage repair, interior work and disc replacement. You will find everything for removing panels, pulling dents and fitting discs.
Repairing dents and damage
For repairing dents without respraying, use smart repair (PDR) tools. Dent pulling rods and glue puller kits straighten the dent from inside or outside. For larger damage to bodywork, use car body repair tools. Filling knives and sanding blocks prepare the surface for the repair.
Removing trims and panels
To release trims and interior panels without damage, use special wedges and levers. Plastic wedges are suitable for delicate surfaces. Steel clip removers release fixing clips without breaking them. When replacing a door lock or hinge, you need door and locking system tools. Always choose based on the OEM number.
Discs and wiper arms
To cut out discs, use cutting wire and pull handles. Saw through the adhesive layer while a counterstay tensions the wire. Choose the wire length based on the disc circumference. Replacing wiper arms? Use wiper arm pullers. A universal puller with adjustable clamping depth removes seized arms from the spindle without damage.
Selection guide
For a dent without paint damage, choose smart repair. For panels and trims, use wedges and clip removers. For disc replacement, you need cutting wire and pull handles. For a seized wiper arm, use a puller. This way you always have the right tool for the job.